ISO 3307

ISO 6344

ISO 3166-2:VU-PAM

ISO 3166-2:US-TN

ISO 3166-2 codes

ISO 639:afp

ISO 639:afi

ISO 3601

ISO 5776, published by the International Organization for Standardization (ISO), is an international standard that specifies symbols for proofreading such as of manuscripts, typescripts and printer's proofs. The total number of symbols specified is 16, each in English, French and Russian. The standard is partially derived from the British Standard BS-5261, but is closer to German standards DIN 16511 and 16549-1. All of these standards date from the time before desktop publishing. A second edition of the standard was published in 2016 which cancels and replaces the first edition from 1983.

ISO 37120

ISO 639

ISO 3166-2:WS

ISO 639:acc

ISO 55001 Asset management – Management systems – Requirements is a standard developed for the use of people or organizations involved in asset management. This standard was developed by ISO technical committee ISO/TC 251. ISO 55001 was published for the first time in January 2014.

ISO 4 abbreviation

ISO 3166-2:US-MS

ISO 57 (character set)

ISO 639:acx

ISO 3166-2:US-ME

ISO 39001

ISO 639:acq

This is a list of ISO 639-3 language codes starting with A. Index | |b |c |d |e |f |g |h |i |j |k |l |m |n |o |p |q |r |s |t |u |v |w |x |y |z Abbreviations are used in the table as follows:
* Scope: I = individual language, M = macrolanguage, S = special code
* Type: A = ancient (extinct since ancient times), C = constructed, E = extinct (in recent times), H = historical (distinct from its modern form), L = living, S = special code Retired codes are enclosed in (parentheses). The column Family contains the generic English name of the language's family or macrolanguage.

ISO 639:abt

ISO 3166-2 of Germany

ISO 639:afb

ISO 3166-2:US-PR

ISO 55000

ISO 639-3 macrolanguages

ISO 639:aes

ISO 5964 was the ISO standard for the establishment and development of multilingual thesauri. Its full title was Guidelines for the establishment and development of multilingual thesauri. It was withdrawn in 2011, when replaced by ISO 25964-1. See more explanation on the official website for ISO 25964

ISO 3166-2:YU

ISO 3166-2 codes for Japan

ISO 3166-2:VN is the entry for Vietnam in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Vietnam, ISO 3166-2 codes are defined for 58 provinces and 5 municipalities. The municipalities have special status equal to the provinces. Each code consists of two parts, separated by a hyphen. The first part is VN, the ISO 3166-1 alpha-2 code of Vietnam. The second part either of the following:
* two digits: provinces
* two letters: municipalities

ISO 3166-2:US-SC

ISO 3166-2:YT is the entry for Mayotte in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently no ISO 3166-2 codes are defined in the entry for Mayotte. Mayotte, an overseas territorial collectivity of France, is officially assigned the ISO 3166-1 alpha-2 code YT. Moreover, it is also assigned the ISO 3166-2 code FR-YT under the entry for France.

ISO 639:aao

ISO 639:adu

ISO 3166-2:UZ is the entry for Uzbekistan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Uzbekistan, ISO 3166-2 codes are defined for 1 city, 12 regions, and 1 republic. The city Tashkent is the capital of the country and has special status equal to the regions.

ISO 5-4

ISO 3166 2-character country code

ISO 639:aaw

ISO 3166-2:UY

ISO 3166-2:VA

ISO 3537

ISO 5776

ISO 3166-2:ZA is the entry for South Africa in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. ZA hails from Dutch: Zuid-Afrikaanse. Currently for South Africa, ISO 3166-2 codes are defined for 9 provinces. Each code consists of two parts, separated by a hyphen. The first part is ZA, the ISO 3166-1 alpha-2 code of South Africa. The second part is two letters.

ISO 3166-2:US-LA

ISO 639:adn

ISO 639-3:ule

ISO 3166-2:US-KY

ISO 55001

ISO 639:aez

ISO 37120 Sustainable development of communities -- Indicators for city services and quality of life defines and establishes methodologies for a set of indicators to steer and measure the performance of city services and quality of life. This standard was developed by ISO project committee ISO/TC 268.

ISO 3166-2 codes for Burundi

ISO 3166-2:VN

ISO 639:aek

ISO 3166-2:WS is the entry for Samoa in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Samoa, ISO 3166-2 codes are defined for 11 districts. Each code consists of two parts, separated by a hyphen. The first part is WS, the ISO 3166-1 alpha-2 code of Samoa. The second part is two letters.

ISO 639:aab

ISO 3166-2:US-GU

ISO 639:abl

ISO 639:ada

ISO 3166-2:US-NC

ISO 639 is a set of standards by the International Organization for Standardization that is concerned with representation of names for languages and language groups. It was also the name of the original standard, approved in 1967 (as ISO 639/R) and withdrawn in 2002. The ISO 639 set consists of five parts.

ISO 639-2

ISO 3977 is an international standard related to the design and procurement of gas turbine system applications. ISO 3977 is based primarily on the ASME 133 series on gas turbines, as well as the API 616 and API 11PGT standards. The standard environmental design point of any gas turbine system is 15 °C, 60% relative humidity, and sea level elevation. The standard is divided into eight parts and covers procurement, design requirements, installation, and reliability.

ISO 3166-2:US-GA

ISO 3166-2:VN is the entry for Vietnam in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Vietnam, ISO 3166-2 codes are defined for 58 provinces and 5 municipalities. The municipalities have special status equal to the provinces. Each code consists of two parts, separated by a hyphen. The first part is VN, the ISO 3166-1 alpha-2 code of Vietnam. The second part either of the following:

ISO 639:abe

The International Standard ISO 6385 "Ergonomic principles in the design of work systems" is published by the International Organisation for Standardisation and was last revised in 2016. As the standard states in the 'Scope' section: “This International Standard is considered to be the core ergonomic standard from which many others on specific issues are derived”.

ISO 3536

ISO 3166-2:VG

ISO 639:acp

ISO 3166-2:VU-SAM

ISO 639:aai

ISO 3166-2:UY is the entry for Uruguay in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Uruguay, ISO 3166-2 codes are defined for 19 departments. Each code consists of two parts, separated by a hyphen. The first part is UY, the ISO 3166-1 alpha-2 code of Uruguay. The second part is two letters.

ISO 639:afo

ISO 639:aav

ISO 6166

ISO 40001:2012 Road traffic safety (RTS) management systems - Requirements with guidance for use is an ISO standard for a management system (similar to ISO 9000) for road traffic safety. The implementation of the standard is intended to enable organizations to improve their traffic safety and to reduce the number of persons killed or seriously injured. Development of the standard began in February 2008 and the first edition was published on October 1, 2012. It is under the responsibility of the ISO Technical Committee "ISO/TC 241".

ISO 3166-2:US-NJ

ISO 3166 code

ISO 639:adh

ISO 639-3:cux

ISO 3166-2:US-VI

ISO 639:aed

ISO 639:aap

ISO 5-3

ISO 3166-2 codes for Germany

ISO 5 is an international standard for in photography and graphic technology. The most recent version split the standard into 4 parts:
* ISO 5-1:2009 Geometry and functional notation
* ISO 5-2:2009 Geometric conditions for transmittance density
* ISO 5-3:2009 Spectral conditions
* ISO 5-4:2009 Geometric conditions for reflection density

ISO 3166-2:US-IA

ISO 639:ab

ISO 40500

ISO 361

ISO 639:abu

ISO 639:acw

ISO 3166-2 codes for Indonesia

ISO 639:ado

ISO 639:aex

ISO 3166-2:US-AK

ISO 639:adb

ISO 428 was an International Organization for Standardization (ISO) standard fully entitled "Wrought Copper-Aluminium Alloys -- Chemical Composition And Forms of Wrought Products", specifying the allowable compositions of various copper-aluminum alloy specifications (see aluminium bronze). The standard, promulgated in 1983, was withdrawn in March 2000. Following is a list of aluminium bronze compositions, by ISO 428 designations (proportional composition by weight; copper is the remainder by weight and is not listed):

ISO 3166-2:UM is the entry for the United States Minor Outlying Islands in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for the United States Minor Outlying Islands, ISO 3166-2 codes are defined for 9 "islands, groups of islands". Each code consists of two parts, separated by a hyphen. The first part is UM, the ISO 3166-1 alpha-2 code of the United States Minor Outlying Islands. The second part is two digits, which is the old FIPS 5-2 numeric code of the island or group of islands. As an outlying area of the United States, the United States Minor Outlying Islands are also assigned the ISO 3166-2 code US-UM under the entry for the United States.

ISO 639:aeq

ISO 3166-2:US-IN

ISO 639:adp

ISO 3166-2:WF is the entry for Wallis and Futuna in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Wallis and Futuna, ISO 3166-2 codes are defined for three administrative precincts. Each code consists of two parts, separated by a hyphen. The first part is WF, the ISO 3166-1 alpha-2 code of Wallis and Futuna. The second part is two letters.

ISO 639:aby

ISO 639:afg

ISO 639:aac

ISO 639:aca

ISO 3166-2:US-AR

ISO 639:abr

ISO 639:adi

ISO 639:adw

ISO 5428:1984, Greek alphabet coded character set for bibliographic information interchange, is an ISO standard for an 8-bit character encoding for the modern Greek language. It contains a set of 73 graphic characters and is available through UNIMARC. In practice it is now superseded by Unicode.

ISO 639:aaq

ISO 3166-2:ZW

ISO 639-6, Codes for the representation of names of languages — Part 6: Alpha-4 code for comprehensive coverage of language variants, was a proposed international standard in the ISO 639 series, developed by ISO/TC 37/SC 2 (International Organization for Standardization, Technical Committee 37, Subcommittee 2: Terminographical and lexicographical working methods). It contained four-letter codes that denote variants of languages and language families. This allowed one to differentiate between, for example, historical (glvx) versus revived (rvmx) Manx, while ISO 639-3 only includes glv for Manx.

ISO 3166-2:ZM is the entry for Zambia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Zambia, ISO 3166-2 codes are defined for 10 provinces. Each code consists of two parts, separated by a hyphen. The first part is ZM, the ISO 3166-1 alpha-2 code of Zambia. The second part is two digits (01–10).

ISO 639:a

ISO 3950 notation

ISO 639-3

ISO 44001 Collaborative business relationship management systems – Requirements and framework is an international standard published 1 March 2017 by the International Organisation for Standardisation. It is based on British Standards BS 11000, initially developed from 2006 as PAS 11000 (2006).ISO 44001 is now aligned to the high level structure that covers all ISO management standards, and incorporates the eight stage life cycle model that was the basis for BS 11000 to help business partners maximize the value of collaborative working:

ISO 639:abg

ISO 3166-2:VI

ISO 55000 is an international standard covering management of assets of any kind. Before it, a Publicly Available Specification (PAS 55) was published by the British Standards Institution in 2004 for physical assets. The ISO 55000 series of Asset Management standards was launched in January 2014.

ISO 38500

ISO 4165 connector

ISO 639:acv

ISO 639:abn

ISO 3166-2:VG is the entry for the British Virgin Islands in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently no ISO 3166-2 codes are defined in the entry for the British Virgin Islands. The British Virgin Islands are officially assigned the ISO 3166-1 alpha-2 code VG.

ISO 3166-2:US-MN

ISO 3166-2:US-SD

ISO 3166-2:US-

ISO 639:aem

ISO 44001

ISO 3166-2 codes for New Zealand

ISO 3632

ISO 5

ISO 639:aay

ISO 3166-2:US-NH

ISO 4343

ISO 5725

ISO 639:aci

ISO 639:adx

ISO 3166-2:US-CT

ISO 3166-2:US-OR

ISO 3166-2:US-WY

ISO 3779

ISO 639:adq

ISO 3166-2:VU-TOB

ISO 639:aad

ISO 639:aak

ISO 3977

ISO 3602

ISO 639:afh

ISO 639:afa

ISO 639:aey

ISO 428

ISO 639-4

ISO 3166-2:YT

ISO 3166-2 codes for Ecuador

ISO 5964

ISO 639:aer

ISO 4157

ISO 3166-2:VE is the entry for Venezuela in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Venezuela, ISO 3166-2 codes are defined for 1 capital district, 1 federal dependency, and 23 states. The Venezuelan Capital District contains the central part of the capital of the country Caracas and has special status equal to the states.

ISO 5426

ISO 639:aar

ISO 3166-2:US-OK

ISO 3166-2:VU

ISO 639:acb

ISO 639:abs

ISO 3901

ISO 3538

ISO 639:aee

ISO 639:acu

ISO 639-2 codes

ISO 5800

ISO 3602 Strict

ISO 3166-2:US-NV

ISO 639:abf

ISO 32000

ISO 3166-2:UZ

ISO 639:abm

ISO 639:ach

ISO 639:afn

ISO 3166-2:US-DC

ISO 6

ISO 3166-2 codes for Mexico

ISO 639-2 code

ISO 639:aax

ISO 3166-2 codes for Australia

ISO 3166-2 codes for Georgia

ISO 3166-2:US-CA

ISO 639:adj

ISO 639:ael

ISO 639: csl

ISO 3166-2:US-MT

ISO 3166-2:UM

ISO 639:abz

ISO 639:aas

ISO 6344 is an international standard covering the materials sizes and tests regarding sandpaper and other similar coated abrasives. It has three parts:
* ISO 6344-1:1998: Grain size distribution test
* ISO 6344-2:1998: Determination of grain size distribution of macrogrits P12 to P220
* ISO 6344-3:1998: Determination of grain size distribution of microgrits P240 to P2500

ISO 639:aea

ISO 6391

ISO 639:ady

ISO 4217 currency code

ISO 3864 specifies international standards for safety symbols. These labels are graphical, to overcome language barriers. The standard is split into four parts:
* ISO 3864-1:2011 Part 1: Design principles for safety signs and safety
* ISO 3864-2:2016 Part 2: Design principles for product safety labels
* ISO 3864-3:2012 Part 3: Design principles for graphical symbols for use in safety signs
* ISO 3864-4:2011 Part 4: Colorimetric and photometric properties of safety sign materials

ISO 639:adr

ISO 639:abb

ISO 3297

ISO 639:aaz

ISO 639:aal

ISO 639:aae

ISO 44001 Collaborative business relationship management systems – Requirements and framework is an international standard published 1 March 2017 by the International Organisation for Standardisation. It is based on British Standards BS 11000, initially developed from 2006 as PAS 11000 (2006).ISO 44001 is now aligned to the high level structure that covers all ISO management standards, and incorporates the eight stage life cycle model that was the basis for BS 11000 to help business partners maximize the value of collaborative working:
* Operational awareness
* Knowledge
* Internal assessment
* Partner selection
* Working together
* Value creation
* Staying together
* Exit strategy implementation BS 11000 was formally launched at the House of Lords in London on 7 December 2010. The Institute for Collaborative Working, which promotes BS 11000 and ISO 44001, argues that there is a case for this standard because "as [businesses] see greater reliance on external parties to deliver solutions and an increase on contracting for outcomes, the emphasis on collaborative working will grow".

ISO 639:abi

ISO 3166-2:VE is the entry for Venezuela in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Venezuela, ISO 3166-2 codes are defined for 1 capital district, 1 federal dependency, and 23 states. The Venezuelan Capital District contains the central part of the capital of the country Caracas and has special status equal to the states. Each code consists of two parts, separated by a hyphen. The first part is VE, the ISO 3166-1 alpha-2 code of Venezuela. The second part is a letter:
* A: federal district
* B–V (except Q): states as of late 1980s
* W: federal dependency
* X: state created in 1998
* Y–Z: former federal territories given state status in early 1990s

ISO 3166-2 codes for Sweden

ISO 639:add

ISO 3602 strict

ISO 4 (character set)

ISO 3166 codes

ISO 3166-2:US-IL

ISO 3166-2:US-DE

ISO 5427 is a character set developed by ISO. The first half was published in 1979, and the second half was published in 1981. It supports the Russian (also before 1918), Belarusian, Bulgarian (also before 1945), Ukrainian, Macedonian, and Serbian languages.

ISO 3166-2 MX

ISO 639:acn

ISO 639:acf

ISO 3166-2:UM is the entry for the United States Minor Outlying Islands in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for the United States Minor Outlying Islands, ISO 3166-2 codes are defined for 9 "islands, groups of islands".

ISO 3166-2 codes for Finland

ISO 3166-2:US-NM

ISO 3166-2:US-TX

ISO 639:afe

ISO 3166-2:US-MA

ISO 639:af

ISO 3166-2:US-RI

ISO 3166-88

ISO 639:abq

ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between 12 and 24 V DC at up to 12 amps to appliances in vehicles. Although roughly similar in design to an automotive accessory receptacle, the ISO 4165 connector is shorter and smaller in diameter. It was originally a standard fitting on all the German military vehicles during World War II. The body (which remains outside the receptacle) is 20 mm in diameter. The resilient neck must mate with a 12 mm diameter hole. The center pin is 5 mm in diameter.

ISO 5428

ISO 639-5

ISO 3166 standard

ISO 4157 is an ISO standard for construction drawings and designation systems. It is composed of 3 parts:
* ISO 4157-1:1998 "Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings"
* ISO 4157-2:1998 "Construction drawings -- Designation systems -- Part 2: Room names and numbers"
* ISO 4157-3:1998 "Construction drawings -- Designation systems -- Part 3: Room identifiers" Main definitions: Standard samples: 00 Ground floor05 5th floor-2 2nd basement floor#0215 2nd floor, room 15

ISO 4:1984

ISO 32000-1

ISO 50001

ISO 3166-2:US-AZ

ISO 3166-2:ZA-ZN

ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between 12 and 24 V DC at up to 12 amps to appliances in vehicles. Although roughly similar in design to an automotive accessory receptacle, the ISO 4165 connector is shorter and smaller in diameter. It was originally a standard fitting on all the German military vehicles during World War II. The body (which remains outside the receptacle) is 20 mm in diameter. The resilient neck must mate with a 12 mm diameter hole. The center pin is 5 mm in diameter. The ISO 4165:2001 DC connector is also known as the BMW Accessory plug, as it is used on BMW motorcycles; as the Powerlet connector, named after a firm that produces them; and, in Australia (where they are popular in mobile power applications, including 4WD and Caravaning), as the Hella plug, or Merit plug. At least one manufacturer sells a plug that combines a cigarette lighter plug and a powerlet, in much the same way that combination auto/airplane notebook computer power adapters combine a cigarette lighter plug and an ARINC 628/EmPower plug.

ISO 37001 Anti-bribery management systems -- Requirements with guidance for use identifies a management standard to help organizations in the fight against corruption, by establishing a culture of integrity, transparency and compliance. The anti-bribery management system can be a stand-alone system or integrated into an already implemented management system such as the Quality Management System ISO 9001. An organization can choose to implement the anti-bribery management system in conjunction with or as part of other systems, such as those relating to quality, environment and safety.

ISO 3166-2:YE is the entry for Yemen in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Yemen, ISO 3166-2 codes are defined for 1 municipality and 21 governorates. The municipality Sana'a is the capital of the country and has special status equal to the governorates.

ISO 3166-2 codes for Canada

ISO 3864

ISO 31661

ISO 639:abx

ISO 639-3 macrolanguage

ISO 3166-2:VC

ISO 4217:USD

ISO 639:act

ISO 361 Basic ionizing radiation symbol is an international standard that specifies the shape, proportions, application and restrictions on the use of the symbol. It may be used to signify the actual or potential presence of ionizing radiation. It is not used for sound waves and other types of electromagnetic waves. The standard does not specify the radiation levels at which it is to be used.

ISO 639:aba

ISO 639:adl

ISO 3166-2:US-MI

ISO 639-3:2007, Codes for the representation of names of languages – Part 3: Alpha-3 code for comprehensive coverage of languages, is an international standard for language codes in the ISO 639 series. It defines three-letter codes for identifying languages. The standard was published by ISO on 1 February 2007.

ISO 639:aew

ISO 639:aam

ISO 639:aen

ISO 3166-2:US-MO

ISO 3166-2:US-WA

ISO 639:ae

ISO 5426 is character set developed by ISO. It was first published in 1983.

ISO 639-6

ISO 5427

ISO 639:ade

ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation (ETRTO). It is designed to make tire sizing consistent and clear. It replaces overlapping informal systems that ambiguously distinguished between sizes. For example, at least 6 different "26 inch" sizes exist (just by American notation), and "27 inch" wheels have a larger diameter than American "28 inch" (French "700C") wheels. The Japanese standard JIS D 9421 specifies the same dimensional system, but adds details on additional rim types and also specifies additional parameters such as rim strength and details spoke holes.

ISO 3166-2 codes for Belgium

ISO 3166-2:VC is the entry for Saint Vincent and the Grenadines in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Saint Vincent and the Grenadines, ISO 3166-2 codes are defined for 6 parishes. Each code consists of two parts, separated by a hyphen. The first part is VC, the ISO 3166-1 alpha-2 code of Saint Vincent and the Grenadines. The second part is two digits:

ISO 639-5:2008 "Codes for the representation of names of languages—Part 5: Alpha-3 code for language families and groups" is a highly incomplete international standard published by the International Organization for Standardization (ISO). It was developed by ISO Technical Committee 37, Subcommittee 2, and first published on May 15, 2008. It is part of the ISO 639 series of standards.

ISO 6385

ISO 3166-2:US-ID

ISO 639-2:1998, Codes for the representation of names of languages — Part 2: Alpha-3 code, is the second part of the ISO 639 standard, which lists codes for the representation of the names of languages. The three-letter codes given for each language in this part of the standard are referred to as "Alpha-3" codes. There are 487 entries in the list of ISO 639-2 codes. The US Library of Congress is the registration authority for ISO 639-2 (referred to as ISO 639-2/RA). As registration authority, the LOC receives and reviews proposed changes; they also have representation on the ISO 639-RA Joint Advisory Committee responsible for maintaining the ISO 639 code tables.

ISO 3166-2:US-HI

ISO 639-3:nan

ISO 3166-2:ZA

ISO 639:abh

ISO 3166-2:VC is the entry for Saint Vincent and the Grenadines in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Saint Vincent and the Grenadines, ISO 3166-2 codes are defined for 6 parishes. Each code consists of two parts, separated by a hyphen. The first part is VC, the ISO 3166-1 alpha-2 code of Saint Vincent and the Grenadines. The second part is two digits:
* 01–05: parishes on the island of Saint Vincent
* 06: parish in the northern part of the Grenadines

ISO 3166-2:VU-MAP

ISO 3166-2:US-AL

ISO 639:acm

ISO 3166-2:VA is the entry for Vatican City in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently no ISO 3166-2 codes are defined in the entry for Vatican City. The country has no defined subdivisions. Vatican City is officially assigned the ISO 3166-1 alpha-2 code VA.

ISO 3166-2:US-PA

ISO 3166-2:VU is the entry for Vanuatu in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Vanuatu, ISO 3166-2 codes are defined for 6 provinces. Each code consists of two parts, separated by a hyphen. The first part is VU, the ISO 3166-1 alpha-2 code of Vanuatu. The second part is three letters.

ISO 639:aaf

ISO 3506

ISO 639:aa

ISO 3166-2 codes for China

ISO 639:acz

ISO 639:acs

ISO 3166-2:WF is the entry for Wallis and Futuna in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Wallis and Futuna, ISO 3166-2 codes are defined for three administrative precincts. Each code consists of two parts, separated by a hyphen. The first part is WF, the ISO 3166-1 alpha-2 code of Wallis and Futuna. The second part is two letters. Wallis and Futuna, an overseas territorial collectivity of France, is officially assigned the ISO 3166-1 alpha-2 code WF. Moreover, it is also assigned the ISO 3166-2 code FR-WF under the entry for France.

ISO 3166-2:US-NY

ISO 3166-2:US-ND

ISO 639:abk

ISO 639:abd

ISO 50001 Energy management systems – Requirements with guidance for use is a specification created by the International Organization for Standardization (ISO) for an energy management system. The standard specifies the requirements for establishing, implementing, maintaining and improving an energy management system, whose purpose is to enable an organization to follow a systematic approach in achieving continual improvement of energy performance, including energy efficiency, energy security, energy use and consumption. The standard aims to help organizations continually reduce their energy use, and therefore their energy costs and their greenhouse gas emissions.

ISO 639:acl

ISO 3166-2:VI is the entry for the United States Virgin Islands in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently no ISO 3166-2 codes are defined in the entry for the United States Virgin Islands. The United States Virgin Islands, an outlying area of the United States, are officially assigned the ISO 3166-1 alpha-2 code VI. Moreover, it is also assigned the ISO 3166-2 code US-VI under the entry for the United States.

ISO 3166-2:ZW is the entry for Zimbabwe in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Zimbabwe, ISO 3166-2 codes are defined for 10 provinces. Each code consists of two parts, separated by a hyphen. The first part is ZW, the ISO 3166-1 alpha-2 code of Zimbabwe. The second part is two letters.

ISO 3166-2:US-WV

ISO 3166-2:ZM

ISO 639:afk

ISO 3166-2:US-KS

ISO 4031

ISO 3166-2:US-UT

ISO 3166-2:ZA-NW

ISO 3307 is an international standard for date and time representations issued by the International Organization for Standardization (ISO). The standard was issued in 1975, then was superseded by ISO 8601 in 1988.

ISO 3166/MA

ISO 3166-2:VU-SEE

ISO 4031 is an international standard first issued in 1978 by the International Organization for Standardization. It defined the representation of local time differentials, commonly referred to as time zones. It has since been superseded by a newer standard, ISO 8601. This newer standard sets out the current formats for local time differentials and so ISO 4031 is no longer in use.

ISO 5775

ISO 639:adf

ISO 400

ISO 639:abv

ISO 639:abo

ISO 3166-2 codes for the United States

ISO 639:aag

ISO 3:1973

ISO 639-2:1998, Codes for the representation of names of languages — Part 2: Alpha-3 code, is the second part of the ISO 639 standard, which lists codes for the representation of the names of languages. The three-letter codes given for each language in this part of the standard are referred to as "Alpha-3" codes. There are 487 entries in the list of ISO 639-2 codes.

ISO 3166-2:US-OH

ISO 639:afr

ISO 518

ISO 639-3:2007, Codes for the representation of names of languages – Part 3: Alpha-3 code for comprehensive coverage of languages, is an international standard for language codes in the ISO 639 series. It defines three-letter codes for identifying languages. The standard was published by ISO on 1 February 2007. ISO 639-3 extends the ISO 639-2 alpha-3 codes with an aim to cover all known natural languages. The extended language coverage was based primarily on the language codes used in the Ethnologue (volumes 10-14) published by SIL International, which is now the registration authority for ISO 639-3. It provides an enumeration of languages as complete as possible, including living and extinct, ancient and constructed, major and minor, written and unwritten. However, it does not include reconstructed languages such as Proto-Indo-European. ISO 639-3 is intended for use as metadata codes in a wide range of applications. It is widely used in computer and information systems, such as the Internet, in which many languages need to be supported. In archives and other information storage, they are used in cataloging systems, indicating what language a resource is in or about. The codes are also frequently used in the linguistic literature and elsewhere to compensate for the fact that language names may be obscure or ambiguous.

ISO 639:acd

ISO 3166-2:YE
ISO 3166-2:YE is the entry for Yemen in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Yemen, ISO 3166-2 codes are defined for 1 municipality and 21 governorates. The municipality Sana'a is the capital of the country and has special status equal to the governorates. Each code consists of two parts, separated by a hyphen. The first part is YE, the ISO 3166-1 alpha-2 code of Yemen. The second part is two letters.

ISO 3166-2:WF

ISO 639:aec

ISO 639:ads

ISO 61 (character set)

ISO 639:aat

ISO 5-2

ISO 639:aeu

ISO 639:abc

ISO 3780

ISO 3166-2:VE

ISO 60 (character set)

ISO 3166-2:US-Maine

ISO 5-1

ISO 3166-2:VU-TAE

ISO 3950

ISO 639-1 codes

ISO 3166-2:US-VT

ISO 3166-2:US-NE

ISO 4:1997

ISO 4157 is an ISO standard for construction drawings and designation systems. It is composed of 3 parts:
* ISO 4157-1:1998 "Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings"
* ISO 4157-2:1998 "Construction drawings -- Designation systems -- Part 2: Room names and numbers"
* ISO 4157-3:1998 "Construction drawings -- Designation systems -- Part 3: Room identifiers" Main definitions:
* Floor n: is the horizontal partition between storey n and storey (n+1). The floor in storey 5 is named as floor 4.
* Room: identifiable physical space (area or volume, space or void) real or theoretical, although not necessary a traditional room (i.e., enclosed by walls, ceiling and floor).
* Room identifiers: registration number of spaces:
* Room numbers: numbers (code) of rooms Standard samples: 00 Ground floor05 5th floor-2 2nd basement floor#0215 2nd floor, room 15

ISO 639:adz

ISO 3758

ISO 4100

ISO 500

ISO 639:ack

ISO 639:abj

ISO 639:agl

ISO 3166-2:US-MD

ISO 639:acy

ISO 3200

ISO 4165

ISO 37001

ISO 3166-2:US-WI

ISO 639:aah

ISO 3166-2 codes for Argentina

ISO 3166-2:US-VA

ISO 639:abw

ISO 5218

ISO 639:aan

ISO 50001 Energy management systems – Requirements with guidance for use is a specification created by the International Organization for Standardization (ISO) for an energy management system. The standard specifies the requirements for establishing, implementing, maintaining and improving an energy management system, whose purpose is to enable an organization to follow a systematic approach in achieving continual improvement of energy performance, including energy efficiency, energy security, energy use and consumption. The standard aims to help organizations continually reduce their energy use, and therefore their energy costs and their greenhouse gas emissions. ISO 50001 was originally released by ISO in June 2011 and is suitable for any organization, whatever its size, sector or geographical location. The second edition, ISO 50001:2018 was released in August of 2018. The system is modelled after the ISO 9001 Quality Management System and the ISO 14001 Environmental Management System (EMS). Eccleston describes the procedural details of the ISO Energy Management System (EnMS) and compares its procedures with those of the ISO 14001 EMS. A significant feature in ISO 50001 is the requirement to "... improve the EnMS and the resulting energy performance" (clause 4.2.1 c). The other standards mentioned here (ISO 9001 and ISO 14001) both require improvement to the effectiveness of the Management System but not to the quality of the product/service (ISO 9001) or to environmental performance (ISO 14001). It is anticipated that by implementing ISO 9001 and 14001 together an organization would improve quality and environmental performance, but the standards do not currently specify this as a requirement. ISO 50001, therefore, has made a major leap forward in 'raising the bar' by requiring an organization to demonstrate that they have improved their energy performance. There are no quantitative targets specified – an organization chooses its own then creates an action plan to reach the targets. With this structured approach, an organization is more likely to see some tangible financial benefits.

ISO 5:1974

ISO 3394

ISO 519

ISO 639:adg

ISO 639:aau

ISO 3166-2:UZ is the entry for Uzbekistan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently for Uzbekistan, ISO 3166-2 codes are defined for 1 city, 12 regions, and 1 republic. The city Tashkent is the capital of the country and has special status equal to the regions. Each code consists of two parts, separated by a hyphen. The first part is UZ, the ISO 3166-1 alpha-2 code of Uzbekistan. The second part is two letters.

ISO 3166-2 codes for Norway

ISO 639:ace

ISO 639:abp

ISO 3166-2:VI is the entry for the United States Virgin Islands in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO), which defines codes for the names of the principal subdivisions (e.g., provinces or states) of all countries coded in ISO 3166-1. Currently no ISO 3166-2 codes are defined in the entry for the United States Virgin Islands.

ISO 639-6, Codes for the representation of names of languages — Part 6: Alpha-4 code for comprehensive coverage of language variants, was a proposed international standard in the ISO 639 series, developed by ISO/TC 37/SC 2 (International Organization for Standardization, Technical Committee 37, Subcommittee 2: Terminographical and lexicographical working methods). It contained four-letter codes that denote variants of languages and language families. This allowed one to differentiate between, for example, historical (glvx) versus revived (rvmx) Manx, while ISO 639-3 only includes glv for Manx. The data supporting ISO 639-6 was researched and compiled by the ISO's registration authority GeoLang. ISO 639-6 was published on 17 November 2009, and withdrawn on 25 November 2014. The database also links each language and family to its principal ancestor, allowing the user to follow the classification of various languages. For example, the codes and ancestry of English is given below: The database differentiated between different scripts used for the same language. For example, a number of different scripts were used in the Ottoman Empire and as a result the Ottoman Turkish language has been categorized as follows:

ISO 639:aeb

ISO 639:adt

ISO 639:aaa

ISO 3166-2 codes for Brazil

ISO 639:acr