ISO/IEC 8859-10:1998

ISO/IEC 7810 ID-1/000

ISO/IEC 8859-15:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 15: Latin alphabet No. 9, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1999. It is informally referred to as Latin-9 (and was for a while called Latin-0). It is similar to ISO 8859-1, and thus generally intended for “Western European” languages, but replaces some less common symbols with the euro sign and some letters that were now deemed missing in part 1 for the target use.ISO-8859-15 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429.Microsoft has assigned code page 28605 a.k.a. Windows-28605 to ISO-8859-15. IBM has assigned code page 923 to ISO 8859-15.There were attempts to make ISO-8859-15 the default character set for 8-bit communication, but it was never able to supplant the popular ISO-8859-1. However, it did see some use as a character set for terminal or textual programs under Linux when the Euro sign was needed, but the use of full UTF-8 (Unicode) was not practical. All the printable characters from both ISO/IEC 8859-1 and ISO/IEC 8859-15 are also found in Windows-1252. In October 2016 0.1% of all web sites use ISO-8859-15.

Note: This special working group has been disbanded. The work begun in ISO/IEC/JTC 1/SWG 5 on Internet of Things standardization gaps will be continued in ISO/IEC JTC 1/WG 10.ISO/IEC JTC 1/SWG 5 Internet of Things (IoT) is a standardization special working group (SWG) of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates the development of standards for Internet of Things (IoT). ISO/IEC JTC 1/SWG 5 was established in 2012 at the 27th plenary meeting of ISO/IEC JTC 1 in Jeju. The special working group was established as a result of growing interest in the field of IoT by other standards organizations. The international secretariat of ISO/IEC JTC 1/SWG 5 is the Korean Agency for Technology and Standards (KATS), located in the Republic of Korea.

ISO/IEC 8859-3

ISO/IEC 8859-2:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin alphabet No. 2, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as "Latin-2". It is generally intended for Central or "Eastern European" languages that are written in the Latin script.

ISO/OSI Reference Model

ISO/IEC 27799

ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/Hebrew alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings. ISO/IEC 8859-8:1999 from 1999 represents its second and current revision, preceded by the first edition ISO/IEC 8859-8:1988 in 1988. It is informally referred to as Latin/Hebrew. ISO/IEC 8859-8 covers all the Hebrew letters, but no Hebrew vowel signs. IBM assigned code page 916 to it.ISO-8859-8 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. The text is (usually) in logical order, so bidi processing is required for display. Nominally ISO-8859-8 (code page 28598) is for “visual order”, and ISO-8859-8-I (code page 38598) is for logical order. But usually in practice, and required for HTML and XML documents, ISO-8859-8 also stands for logical order text. There is also ISO-8859-8-E which supposedly requires directionality to be explicitly specified with special control characters; this latter variant is in practice unused.This character set was also adopted by Israeli Standard SI1311:2002.

ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of computer graphics, image processing, and environmental data representation.

ISO/IEC 9945

ISO/IEC JTC 1/SC 40 IT Service Management and IT Governance is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).

ISO/IEC 80000-14

ISO/TC211

ISO/IEC 7942-1:1994

ISO/PAS 28007:2012

ISO/IEC 8859-10:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 10: Latin alphabet No. 6, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1992. It is informally referred to as Latin-6.

ISO646-FR

ISO/IEC 9995 Information technology — Keyboard layouts for text and office systems is an ISO standard series defining layout principles for computer keyboards. It does not define specific layouts but provides the base for national and industry standards which define such layouts.The project of this standard was adopted at ISO in Berlin in 1985 under the proposition of Dr Yves Neuville. The ISO/IEC 9995 standard series dates to 1994 and has undergone several updates over the years.

ISO/IEC 23008-1

Note: This special working group has been disbanded.ISO/IEC JTC 1/SWG on Accessibility (SWG-A) is a special working group of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) that promotes and facilitates standards development within the field of information and communications technology (ICT) accessibility.

ISO/IEC 29199-2

ISO/IEEE 11073 Personal Health Data (PHD) standards are a group of standards addressing the interoperability of personal health devices (PHDs) such as weighing scales, blood pressure monitors, blood glucose monitors and the like. The standards draw upon earlier IEEE11073 standards work, but differ from this earlier work due to an emphasis on devices for personal use (rather than hospital use) and a simpler communications model.

ISO/TC 292 Security and resilience a technical committee of the International Organization for Standardization formed in 2015 to develop standards in the area of security and resilience.In June 2014 the Technical management Board of ISO (TMB) took the decision to create a new ISO Technical committee called ISO/TC 292 where three committees were merged into one. The official starting date for the work of TC 292 was 2015-01-01, when the three committees were disbanded and their work incorporated into ISO/TC 292. The committee was also assigned the responsibility for the area of supply chain security, including the ISO 28000 series previously developed by ISO/TC 8.The creation of ISO/TC 292 clarifies ISO’s structural organization on security matters, and prepares ISO to tackle future topics in this field by creating a de facto coordination body within the TC central structure. This structure is optimized to limit and prevent conflict or duplication of work. It will assist public administrations/authorities with a general interest and protective mission to optimize their participation in ISO's work in this sector. Non-Profit organizations with limited resources will also benefit from this simplified structure.The following committees were merged into ISO/TC 292.ISO/TC 223 Societal security (2001-2014)ISO/TC 247 Fraud countermeasures and controls (2009-2014)ISO/PC 284 Management system for quality of PSC operations (2013-2014)

ISO646-CA2

ISO/IEC Joint Technical Committee 1

ISO646-FR1

ISO/IEC 7813 is an international standard codified by the International Organization for Standardization and International Electrotechnical Commission that defines properties of financial transaction cards, such as ATM or credit cards.

ISO/IEC 33001 Information technology -- Process assessment -- Concepts and terminology is a set of technical standards documents for the computer software development process and related business management functions.ISO/IEC 33001:2015 is a revision of ISO/IEC 15504. The ISO/IEC 330xx family of standards is intended to supersede the ISO/IEC 155xx family.

ISO/IEC 7064:2003

ISO/IEC 8859-2:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin alphabet No. 2, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as "Latin-2". It is generally intended for Central or "Eastern European" languages that are written in the Latin script. Note that ISO/IEC 8859-2 is very different from code page 852 (MS-DOS Latin 2, PC Latin 2) which is also referred to as "Latin-2" in Czech and Slovak regions.ISO-8859-2 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. 0.2% of all web pages use ISO 8859-2 in June 2016. Microsoft has assigned code page 28592 a.k.a. Windows-28592 to ISO-8859-2 in Windows. IBM assigned Code page 1111 to ISO 8859-2.Codepage 1250 a.k.a. Windows-1250 has many of the same characters but in a different arrangement.These code values can be used for the following languages:AlbanianBosnianCroatianCzechGerman (fully compatible with ISO/IEC 8859-1 for German texts)HungarianPolishRomanian (note the comments below)Serbian LatinSlovakSloveneUpper SorbianLower SorbianTurkmen.It can also be used for Romanian, but it is unsuitable for that language, because of lack of letters s and t with commas below, containing s and t with cedillas instead. These letters were unified in the first versions of the Unicode standard, meaning that the appearance with cedilla or with comma was treated as a glyph choice rather than as separate characters; fonts intended for use with Romanian should, therefore, have characters with comma below at those code points. Microsoft did not really provide such fonts for computers sold in Romania. Still, ISO/IEC 8859-2 and Windows-1250 (with the same problem) have been heavily used for Romanian. Unicode (which supports both variants) has taken the lead for web pages, which however often have s and t with cedilla anyway. Unicode notes as of 2014 that encoding the letters with comma below was a mistake, causing corruptions of Romanian data.

ISO/IEC 80000-9

ISO2022

ISO/IEC 9797-1

ISO/IEC 8859-2:1987

ISO216

ISO/IEC TR 22250

ISO/IEC 23003-2

ISO/IEC 8859

ISO/IEC JTC 1/SC 28

ISO/TC 211 is a standard technical committee formed within ISO, tasked with covering the areas of digital geographic information (such as used by geographic information systems) and geomatics. It is responsible for preparation of a series of International Standards and Technical Specifications numbered in the number range starting at 19101. Current Chairman of this committee is Olaf Østensen.

ISO/IEC 8859-16:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 16: Latin alphabet No. 10, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin-10 or South-Eastern European.

ISO/IEC 23271

ISO/OSI

ISO/IEC JTC1/SC29/WG11

ISO/IEC 8859-16:2001

ISO/IEC JTC 1/SC 36

ISO/IEC 23360

ISO/IEC JTC 1/SC 17 Cards and personal identification is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of identification cards and personal identification. The international secretariat of ISO/IEC JTC 1/SC 17 is the British Standards Institution (BSI) located in the United Kingdom.

ISO/IEC 21827 (SSE-CMM – ISO/IEC 21827) is an International Standard based on the Systems Security Engineering Capability Maturity Model (SSE-CMM) developed by the International Systems Security Engineering Association (ISSEA). ISO/IEC 21827 specifies the Systems Security Engineering - Capability Maturity Model, which describes the characteristics essential to the success of an organization's security engineering process, and is applicable to all security engineering organizations including government, commercial, and academic. ISO/IEC 21827 does not prescribe a particular process or sequence, but captures practices generally observed in industry. The model is a standard metric for security engineering practices covering the following:Project lifecycles, including development, operation, maintenance, and decommissioning activitiesEntire organizations, including management, organizational, and engineering activitiesConcurrent interactions with other disciplines, such as system software and hardware, human factors, test engineering; system management, operation, and maintenanceInteractions with other organizations, including acquisition, system management, certification, accreditation, and evaluation.

ISO/TC 176 is Technical Committee 176 of the International Organization for Standardization (ISO), responsible for Quality management and quality assurance - the ISO 9000 family of standards.

ISO/IEC Standard 17024:2003

ISO/IEC JTC1/SC34

ISO/IEC Joint Technical Committee 1, Subcommittee 7, Software and systems engineering

ISO/IEC 7942

ISO/TC 223 Societal Security

ISO/IEC 5218 Information technology — Codes for the representation of human sexes is an international standard that defines a representation of human sexes through a language-neutral single-digit code.

The ISO/TC 215 is the International Organization for Standardization's (ISO) Technical Committee (TC) on health informatics. TC 215 works on the standardization of Health Information and Communications Technology (ICT), to allow for compatibility and interoperability between independent systems.

ISO/IEC JTC 1/SC 32

ISO/IEC 8859-13:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 13: Latin alphabet No. 7, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1998. It is informally referred to as Latin-7 or Baltic Rim. It was designed to cover the Baltic languages, and added characters used in the Polish language missing from the earlier encodings ISO 8859-4 and ISO 8859-10.

Standardization of processes, supporting tools and supporting technologies for the engineering of software products and systems

ISO/IEC JTC1/SC22

ISO/TC 213

ISO/IEC 8859-11:2001

ISO/IEC JTC 1/SC 23 Digitally recorded media for information interchange and storage is a standardization subcommittee of the joint technical committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of removable digital storage media for digital information interchange. The international secretariat of ISO/IEC JTC 1/SC 23 is the Japanese Industrial Standards Committee (JISC) located in Japan.

ISO/IEC 27001 lead auditor

ISO/IEC 8859 is a joint ISO and IEC series of standards for 8-bit character encodings. The series of standards consists of numbered parts, such as ISO/IEC 8859-1, ISO/IEC 8859-2, etc. There are 15 parts, excluding the abandoned ISO/IEC 8859-12. The ISO working group maintaining this series of standards has been disbanded.ISO/IEC 8859 parts 1, 2, 3, and 4 were originally Ecma International standard ECMA-94.

ISO/IEC JTC 1/SC2/WG2

ISO/IEC JTC 1/SC 29

ISO/IEC 8859-11:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 11: Latin/Thai alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin/Thai. It is nearly identical to the national Thai standard TIS-620 (1990). The sole difference is that ISO/IEC 8859-11 allocates non-breaking space to code 0xA0, while TIS-620 leaves it undefined.

ISO/PAS 28000:2007 (Specification for security management systems for the supply chain) is an International Organization for Standardization publicly available specification on requirements of a security management system particularly dealing with security assurance in the supply chain.

ISO/IEC 24744 Software Engineering — Metamodel for Development Methodologies is an ISO standard for software engineering metamodelling for development methodologies. It defines a metamodel from which development methodologies (software, but not only) can be instantiated.In other words, ISO/IEC 24744 provides an agreed-upon set of words (a vocabulary), plus their corresponding meanings (their semantics), that can be used to describe methodologies used to develop software, hardware and other similar products.From a technical viewpoint, ISO/IEC 24744 is based on the principles of method engineering and departs from the strict modelling paradigm sponsored by the Object Management Group, using instead an extension of the object-oriented approach that incorporates powertype patterns and clabjects.

ISO/IEC 8859-1:1987

ISO/IEC 6937:2001, Information technology — Coded graphic character set for text communication — Latin alphabet, is a multibyte extension of ASCII, or rather of ISO/IEC 646-IRV. It was developed in common with ITU-T (then CCITT) for telematic services under the name of T.51, and first became an ISO standard in 1983. Certain byte codes are used as lead bytes for letters with diacritics (accents).

ISO/IEC JTC 1/SC 40 IT Service Management and IT Governance is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 40 develops and facilitates the development of international standards, technical reports, and technical specifications within the fields of IT service management and IT governance, with a focus in IT activity such as audit, digital forensics, governance, risk management, outsourcing, service operations and service maintenance. The international secretariat of ISO/IEC JTC 1/SC 40 is Standards Australia (SA), located in Australia.

ISO3166

ISO/IEC JTC 1/SC 39 Sustainability for and by Information Technology is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of sustainability and resource efficiency through Information Technology. The international secretariat of ISO/IEC JTC 1/SC 39 is the American National Standards Institute (ANSI), located in the United States.

ISO/PAS 28000 - Specification for security management systems for the supply chain

ISO/IEC JTC 1/SC 25 Interconnection of information technology equipment is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1, of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of interconnection of information technology equipment. The international secretariat of ISO/IEC JTC 1/SC 25 is the Deutsches Institut für Normung (DIN) located in Germany.

ISO/IEC HTML

ISO518

ISO/IEC 9593

ISO/TR 11941

ISO/IEC JTC1/SC7 Software engineering

ISO/IEC JTC 1/SC 38 Cloud Computing and Distributed Platforms is a standardization subcommittee, which is part of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 38 was formed at the October 2009 ISO/IEC JTC 1 Plenary Meeting in Tel Aviv via approval of Resolution 36. The international secretariat of ISO/IEC JTC 1/SC 38 is the American National Standards Institute (ANSI), located in the United States. The first meeting of the subcommittee took place in Beijing, China in May 2010. ISO/IEC JTC 1/SC 38 approved its scope, established three working groups and developed terms of reference for each at this inaugural meeting.Established to address three related areas of technology - Web Services, Service Oriented Architecture (SOA), and Cloud Computing - ISO/IEC JTC 1/SC 38 was initially titled Distributed Application Platforms and Services (DAPS). Meeting in Plenary 2 times per year during its first 6 years, with interim electronic and face-to-face meetings of its Working Groups, ISO/IEC JTC 1/SC 38 completed work in Web Services and SOA and increased its focus on Cloud Computing. To reflect this evolution in focus, the JTC 1 2014 Plenary Meeting in Abu Dhabi approved a revised scope and new title for ISO/IEC JTC 1/SC 38, Cloud Computing and Distributed Platforms.

ISO-IEC 8820-5 is a joint ISO/IEC standard that defines Token ring access methods and physical layer specifications.

ISO/IEC JTC1 SC31 WG5 is a standardization working group on RTLS (Real Time Locating Systems).

ISO/IEC 8859-7

ISO/IEC 8859-4:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin alphabet No. 4, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin-4 or North European. It was designed to cover Estonian, Latvian, Lithuanian, Greenlandic, and Sami. It has been largely superseded by ISO/IEC 8859-10 and Unicode. Microsoft has assigned code page 28594 a.k.a. Windows-28594 to ISO-8859-4 in Windows. IBM has assigned code page 914 to ISO 8859-4.ISO-8859-4 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429.

ISO/IEC JTC 1/SC 7 Software and systems engineering is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of engineering of software products and systems. The international secretariat of ISO/IEC JTC 1/SC 7 is the Standards Council of Canada (SCC) located in Canada.

ISO/IEC TR 12182

ISO/IEC JTC 1/SC 37 Biometrics is a standardization subcommittee in the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of biometrics. The international secretariat of ISO/IEC JTC 1/SC 37 is the American National Standards Institute (ANSI), located in the United States.

ISO/IEC 8859-10:1992

ISO/IEC 27001 lead implementer

ISO/IEC 27001:2005, part of the growing ISO/IEC 27000 family of standards, was an information security management system (ISMS) standard published in October 2005 by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Its full name is ISO/IEC 27001:2005 – Information technology – Security techniques – Information security management systems – Requirements.

ISO/IEC 8859-6:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/Arabic alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin/Arabic. It was designed to cover Arabic. Only nominal letters are encoded, no preshaped forms of the letters, so shaping processing is required for display. It does not include the extra letters needed to write most Arabic-script languages other than Arabic itself (such as Persian, Urdu, etc.).ISO-8859-6 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. The text is in logical order, so bidi processing is required for display. Nominally ISO-8859-6 (code page 28596) is for “visual order”, and ISO-8859-6-I (code page 38596) is for logical order. But in practice, and required for HTML and XML documents, ISO-8859-6 also stands for logical order text. There is also ISO-8859-6-E which supposedly requires directionality to be explicitly specified with special control characters; this latter variant is in practice unused. IBM has assigned code page 1089 to ISO 8859-6. It is an emulation for their AIX operating system.

ISO/IEC 27006, part of a growing family of ISO/IEC Information Security Management System (ISMS) standards, the 'ISO/IEC 27000 series', is an information security standard published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).

ISO/IEC JTC 1/SC 2 Coded character sets is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of coded character sets. The international secretariat of ISO/IEC JTC 1/SC 2 is the Japanese Industrial Standards Committee (JISC), located in Japan.

ISO/IEC JTC 1/SC 23 Digitally recorded media for information interchange and storage is a standardization subcommittee of the joint technical committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of removable digital storage media for digital information interchange.

ISO/IEC 8859-11:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 11: Latin/Thai alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin/Thai. It is nearly identical to the national Thai standard TIS-620 (1990). The sole difference is that ISO/IEC 8859-11 allocates non-breaking space to code 0xA0, while TIS-620 leaves it undefined. (In practice, this small distinction is usually ignored.)ISO-8859-11 is not a registered IANA charset name despite following the normal pattern for IANA charsets based on the ISO 8859 series. However, the close equivalent TIS-620 (which lacks the non-breaking space) is registered with IANA, and can without problems be used for ISO/IEC 8859-11, since the no-break space has a code which was unallocated in TIS-620. Microsoft has assigned code page 28601 a.k.a. Windows-28601 to ISO-8859-11 in Windows. A draft had the Thai letters in different spots.As with all varieties of ISO/IEC 8859, the lower 128 codes are equivalent to ASCII. The additional characters, apart from no-break space, are found in Unicode in the same order, only shifted from 0xA1 to U+0E01 and so forth.The Microsoft Windows code page 874 as well as the code page used in the Thai version of the Apple Macintosh, MacThai, are extensions of TIS-620 — incompatible with each other, however. Unicode and UTF-8 are preferred in modern applications. 0.1% of all web pages use Windows-874 in February 2016.

ISO/IEEE 11073 Personal Health Data (PHD) Standards

ISO/IEC 8859-8:1988

ISO/IEC 24727

ISO/IEC 8859-13

ISO/TC 292

ISO/IEC 42010:2007

ISO/IEC 27000-series

ISO/IEC 29500

ISO/TS 80004

ISO/IEC 9075 standard: "Information technology - Database languages - SQL", which describes Structured Query Language.See details by release:SQL-86 (or SQL-87) is the ISO 9075:1987 standard of 1987SQL-89 is the ISO/IEC 9075:1989 standard of 1989SQL-92 is the ISO/IEC 9075:1992 standard of 1992SQL:1999 is the ISO/IEC 9075:1999 standard of 1999SQL:2003 is the ISO/IEC 9075:2003 standard of 2003SQL:2006 is the ISO/IEC 9075:2006 standard of 2006SQL:2008 is the ISO/IEC 9075:2008 standard of 2008SQL:2011 is the ISO/IEC 9075:2011 standard of 2011SQL:2016 is the ISO/IEC 9075:2016 standard of 2016

ISO/IEC 26300:2006

ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques

ISO/IEC JTC 1/SC 7

ISO/IEC JTC 1/SC 32 Data management and interchange is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of data management and interchange. The international secretariat of ISO/IEC JTC 1/SC 32 is the American National Standards Institute (ANSI) located in the United States.

ISO/IEC 24744 Software Engineering — Metamodel for Development Methodologies is an ISO standard for software engineering metamodelling for development methodologies.

ISO/IEC JTC 1/SC 22

ISO/IEC TR 12182:1998

ISO/IEC 8859-14:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 14: Latin alphabet No. 8 (Celtic), is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1998. It is informally referred to as Latin-8 or Celtic.

ISO/IEC 80000-8

ISO/IEC JTC 1/SC 17/WG 1 is a working group within ISO/IEC JTC1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that facilitates standards development within the field of cards and personal identification. A national delegation of experts from various countries meet in person at WG1 to discuss and debate items detailed in a meeting agenda until a consensus is reached.

ISO/TC 68 is a technical committee formed within the International Organization for Standardization (ISO), of Geneva, Switzerland, tasked with developing and maintaining international standards covering the areas of banking, securities, and other financial services.

ISO/IEC 27001

ISO/R 233

ISO/R 646

ISO 27001 Lead Implementer is a professional certification for professionals specializing in information security management systems (ISMS) based on the ISO/IEC 27001 standard.

ISO/IEC JTC 1/SWG 5

ISO/IEC JTC 1/WG 7

ISO/IEC 31010

ISO/IEC 8859-4:1998

ISO/IEC 27002

ISO/IEC TR 14252:1996

ISO646-FI

ISO/IEC 8859-8

ISO/IEC 23003-1

ISO/TC251 is the ISO Technical Committee for Asset Management responsible for the development of the ISO 55000 family of standards. These standards define good practices in Asset Management and requirements for a management system. The standards apply to all types of assets and to all organizations. TC251 was created in March 2015 and currently (as of December 2016) includes members of 29 participating countries, plus 13 observer countries. The technical committee manages five workgroups:ISO/TC 251/WG 3 – Communications: Manages the liaison of TC251 with other ISO and external workgroups that are active in the asset management space. Manages the public communications plan for TC251.ISO/TC 251/WG 4 – Product Improvement: Collects feedback from different stakeholders regarding the ISO 55000 series of standards.ISO/TC 251/WG 5 – Finance: Develops guidance specific to the financial aspects of asset management.ISO/TC 251/WG 6 – Revision of ISO 55002: Manages the formal revision of ISO 55002 – defined as project ISO/NP 55002.ISO/TC 251/AHG 1 – Spanish Translation Task Group

ISO/IEC 8859-14:1998

ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications within the field of audio, picture, multimedia, and hypermedia information coding.

ISO/IEC JTC 1/SC 17/WG 1

ISO/IEC 80000-10

ISO/IEC 27001 Lead Implementer

ISO/IEC 60559:1989-01

ISO/IEC JTC 1/SC 24

ISO/IEC 7810 ID-2

ISO/IEC 21827 (SSE-CMM – ISO/IEC 21827) is an International Standard based on the Systems Security Engineering Capability Maturity Model (SSE-CMM) developed by the International Systems Security Engineering Association (ISSEA).

The ISO/IEC 27001 Lead Auditor certification consists of a professional certification for auditors specializing in information security management systems (ISMS) based on the ISO/IEC 27001 standard and ISO/IEC 19011. This certification is provided by accredited certification bodies or unaccredited ones.

ISO/IEC JTC 1/SC 34, Document description and processing languages is a subcommittee of the ISO/IEC JTC1 joint technical committee, which is a collaborative effort of both the International Organization for Standardization and the International Electrotechnical Commission, which develops and facilitates standards within the field of document description and processing languages.

ISO/IEC 8859-6:1987

ISO/IEC 27001:2005

ISO/IEC 27004

ISO/IEC JTC1

ISO/IEC TR 12182 is an Information technology standard published in 1998 by the Joint Task Committee 1 (JTC1) of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It defines a software categorization in the field of software engineering.

ISO/TC 223

ISO/IEC 8859-9:1999

ISO/IEC 8859-4

ISO/IEC 8859-1:1998

ISO/IEC 9797-1 Information technology – Security techniques – Message Authentication Codes (MACs) – Part 1: Mechanisms using a block cipher is an international standard that defines methods for calculating a message authentication code (MAC) over data.Rather than defining one specific algorithm, the standard defines a general model from which a variety of specific algorithms can be constructed.

ISO/IEC 29500:2008

The ISO/TS 80004 series of standards, from the International Organization for Standardization, describe vocabulary for nanotechnology and its applications. These were largely motivated by health, safety and environment concerns, many of them originally elaborated by Eric Drexler in his 1985 Engines of Creation and echoed in more recent research [1]. The ISO standards simply describe vocabulary or terminology by which a number of critical discussions between members of various stakeholder communities, including the public and political leaders, can begin. Drexler, in Chapter 15 of his 1985 work, explained how such consulation and the evolution of new social media and mechanisms to make objective scientific determinations regardless of political and industrial and public pressures, would be important to the evolution of the field. Nonetheless it took a quarter-century for the ISO to agree and eventually standardize on this terminology.Reviews of the field [2] often need to distinct various definitions of nanomaterials vs. mesomaterials, nanoscale objects from nanostructured materials (including nanoporous materials), and other confused terms. The intent of the ISO standards is to remove most potential for terminology clash especially when dealing with international regulatory synchronization. The standard consist of 8 published parts, while 5 more parts are under preparation which addresses graphene and quantum phenomena.

ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of telecommunications and information exchange between systems. ISO/IEC JTC 1/SC 6 was established in 1964, following the creation of a Special Working Group under ISO/TC 97 on Data Link Control Procedures and Modem Interfaces. The international secretariat of ISO/IEC JTC 1/SC 6 is the Korean Agency for Technology and Standards (KATS), located in the Republic of Korea.

ISO/IEC 8859-6:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/Arabic alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin/Arabic. It was designed to cover Arabic. Only nominal letters are encoded, no preshaped forms of the letters, so shaping processing is required for display.

ISO/IEC 8859-7:2003, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/Greek alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin/Greek. It was designed to cover the modern Greek language. The original 1987 version of the standard had the same character assignments as the Greek national standard ELOT 928, published in 1986.

ISO4

Secretary

ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of computer graphics, image processing, and environmental data representation. The international secretariat of ISO/IEC JTC 1/SC 24 is the British Standards Institute (BSI) located in the United Kingdom.

ISO/IEC 27005

ISO/IEC 646-US

ISO/IEC 8859-3:1999

ISO/IEC 8859-12

ISO/IEC 24744

ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the fields of programming languages, their environments and system software interfaces.

ISO/IEC 8859-5:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/Cyrillic alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin/Cyrillic. It was designed to cover languages using a Cyrillic alphabet such as Bulgarian, Belarusian, Russian, Serbian and Macedonian but was never widely used.

ISO/TC 68 is a technical committee formed within the International Organization for Standardization (ISO), of Geneva, Switzerland, tasked with developing and maintaining international standards covering the areas of banking, securities, and other financial services. As the standards organization under ISO responsible for the development of all international financial services standards, ISO/TC 68 plays a key role in the development and adoption of new technologies in the banking, brokerage and insurance industries. Many of its current work projects involve developing ecommerce standards such as better online security for financial transactions, XML standards for financial transactions and standards to reduce the cost and delays of international financial transactions. The membership of ISO/TC 68, consists of more than 30 organizations assigned by participating national standards bodies plus additional international standards development organizations that work collaboratively toward global financial services standards development.

ISO/TC 97 and IEC/TC 83

ISO/IEC 6937:2001

ISO/IEC 4909:2006 establishes specifications for financial transaction cards using track 3 and is intended to permit interchange based on the use of magnetic stripe encoded information.

ISO/IEC 23003-3

ISO/IEC 7810 ID-3

ISO/IEC 7942-2

ISO/IEC 9995

ISO/TC 184/SC 4 is an international standards organization responsible for industrial data. ISO/TC 184/SC 4 develops and maintains ISO standards that describe and manage industrial product data throughout the life of the product. ISO/TC 184/SC 4, Industrial data, is Subcommittee 4 of ISO/TC 184, Automation systems and integration, which is Technical Committee 184 of the International Organization for Standardization (ISO).

ISO646-DE

ISO/IEC 27001:2013

ISO/IEC 80000-13

Standards Council of Canada
Chairperson

ISO/IEC 7811 Identification cards — Recording technique is a set of nine (7811-1 to 7811-9) standards describing the recording technique on identification cards.It comprises:"Part 1": Embossing"Part 2": Magnetic stripe — Low coercivity"Part 3": Location of embossed characters on ID-1 cardsPart 3 is already withdrawn and revised by Part 1."Part 4": Location of read-only magnetic tracks — Tracks 1 and 2Part 4 is already withdrawn and revised by Part 2."Part 5": Location of read-write magnetic track — Track 3Part 5 is already withdrawn and revised by Part 2."Part 6": Magnetic stripe — High coercivity"Part 7": Magnetic stripe — High coercivity, high densityAllows capacity 10 times that of a card conforming to Part 6."Part 8": Magnetic stripe -- Coercivity of 51,7 kA/m (650 Oe)(including any protective overlay)"Part 9": Tactile identifier markSpecifies the physical characteristics of a tactile identifier mark used by visually impaired card holders to distinguish their cards.

ISO/IEC 23008

ISO/IEC JTC 1/WG 7 Sensor Networks (WGSN) is a standardization working group of the joint technical committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of sensor networks. The international secretariat of ISO/IEC JTC 1/WG 7 is the Korean Agency for Technology and Standards (KATS), located in the Republic of Korea.

ISO/IEC 80000-3

ISO/IEC 27000 is part of a growing family of ISO/IEC Information Security Management Systems (ISMS) standards, the 'ISO/IEC 27000 series'.

ISO/IEC 8859-4:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin alphabet No. 4, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin-4 or North European. It was designed to cover Estonian, Latvian, Lithuanian, Greenlandic, and Sami. It has been largely superseded by ISO/IEC 8859-10 and Unicode. Microsoft has assigned code page 28594 a.k.a.

ISO639-3

ISO/IEC 23270

ISO/IEC 31010 is a standard concerning risk management codified by The International Organization for Standardization and The International Electrotechnical Commission (IEC). The full name of the standard is ISO.IEC 31010:2009 – Risk management – Risk assessment techniques.

ISO/IEC 8859-7:2003, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/Greek alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin/Greek. It was designed to cover the modern Greek language. The original 1987 version of the standard had the same character assignments as the Greek national standard ELOT 928, published in 1986. The table in this article shows the updated 2003 version which adds three characters (0xA4: euro sign U+20AC, 0xA5: drachma sign U+20AF, 0xAA: Greek Ypogegrammeni U+037A). Microsoft has assigned code page 28597 a.k.a. Windows-28597 to ISO-8859-7 in Windows. IBM has assigned code page 813 to ISO 8859-7.ISO-8859-7 is the IANA preferred charset name for this standard (formally the 1987 version, but in practice there is no problem using it for the current version, as the changes are pure additions to previously unassigned codes) when supplemented with the C0 and C1 control codes from ISO/IEC 6429.

ISO/IEC 80000-4

ISO/IEC JTC 1/SC 40

ISO/IEC 80000-7

ISO/IEC 27007

ISO/R 646-1967

ISO/IEC 8859-7:1987

ISO/IEC 8859-14

ISO/IEC JTC1/SC31/WG5

ISO/IEC 8859-6:1999

ISO/IEC 8859-2

ISO/IEC standard binary prefix

Worldwide
ISO/IEC JTC1/SC7

ISO/IEC JTC 1/SWG-A

ISO/IEC 5218 Information technology — Codes for the representation of human sexes is an international standard that defines a representation of human sexes through a language-neutral single-digit code. It can be used in information systems such as database applications.The four codes specified in ISO/IEC 5218 are:0 = not known,1 = male,2 = female,9 = not applicable.The standard specifies that its use may be referred to by the designator "SEX".The standard explicitly states that no significance is to be placed on the encoding of male as 1 and female as 2; the encoding merely reflects existing practice in the countries that initiated this standard. The standard also explains that it "meets the requirements of most applications that need to code human sexes. It does not provide codes for sexes that may be required in specific medical and scientific applications or in applications that need to code sex information other than for human beings."ISO/IEC 5218 was created by ISO's Data Management and Interchange Technical Committee, proposed in November 1976, and updated in July 2004.This standard is used in several national identification numbers. For example, the first digit of the French INSEE number and the first digit of the Republic of China national identification card (Chinese: 中華民國國民身分證) are based on ISO/IEC 5218 values.

ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the fields of programming languages, their environments and system software interfaces. ISO/IEC JTC 1/SC 22 is also sometimes referred to as the "portability subcommittee". The international secretariat of ISO/IEC JTC 1/SC 22 is the American National Standards Institute (ANSI), located in the United States.

ISO646

ISO/IEC 7813

ISO/IEC 8859-5:1999

ISO/PAS 28007:2012 was developed as an initiative by the maritime industry and based on a request by the International Maritime Organization to provide guidelines for ISO 28000-certified companies deploying Privately Contracted Armed Security Personnel (PCASP) on board ships.It was specifically developed for organisations operating in the Piracy High Risk Area in the Indian Ocean, usually providing security transits from the Suez Canal to Southeast Asia and the Indian subcontinent. However, many of the certified or soon to be certified Private Maritime Security Companies equally apply the practices to their operations in other parts of the world. It was developed via an abbreviated ISO process and will have to be reviewed before it becomes a full-fledged ISO Standard.ISO/PAS 28007 is part of a wider range of initiatives to regulate the private security industry which have been developed in recent years. However, it does not adopt the International Code of Conduct principles, which were developed for land-based private security operations rather than for the maritime environment.The United Kingdom Accreditation Service ("UKAS") is the only national accreditation body that accredits auditing companies to certify to the standard. As of May 2015, three certification bodies were actively certifying according to ISO/PAS 28007: LRQA, MSS Global and RTI Forensics.For another maritime private security standard, see ANSI/ASIS PSC.4-2013.

ISO/R646

ISO/IEC 8859-3:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin alphabet No. 3, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin-3 or South European. It was designed to cover Turkish, Maltese and Esperanto, though the introduction of ISO/IEC 8859-9 superseded it for Turkish.

ISO/IEC 7501-1

ISO/IEC 6429

ISO/IEC 7816

ISO/IEC 8859-5:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/Cyrillic alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin/Cyrillic. It was designed to cover languages using a Cyrillic alphabet such as Bulgarian, Belarusian, Russian, Serbian and Macedonian but was never widely used. It would also have been usable for Ukrainian in the Soviet Union from 1933–1990, but it is missing the Ukrainian letter ge, ґ, which is required in Ukrainian orthography before and since, and during that period outside Soviet Ukraine. As a result, IBM created Code page 1124.ISO-8859-5 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429.The 8-bit encodings KOI8-R and KOI8-U, CP866, and also Windows-1251 are far more commonly used. Another possible way to represent Cyrillic is Unicode.The Windows code page for ISO-8859-5 is code page 28595 a.k.a. Windows-28595.

ISO/IEC DIS 29500

ISO/IEC 8859-12 would have been part 12 of the ISO/IEC 8859 character encoding standard series.ISO 8859-12 was originally proposed to support the Celtic languages. ISO 8859-12 was later slated for Latin/Devanagari, but this was abandoned in 1997, during the 12th meeting of ISO/IEC JTC 1/SC 2/WG 3 in Iraklion-Crete, Greece, 4 to 7 July 1997. The Celtic proposal was changed to ISO 8859-14.

CEN ISO/IEEE 11073 Health informatics - Medical / health device communication standards enable communication between medical, health care and wellness devices and with external computer systems. They provide automatic and detailed electronic data capture of client-related and vital signs information, and of device operational data.

ISO/IEC 6937

ISO/IEC 21827:2002

ISO/IEC 80000-6

ISO/IEC 8859-16:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 16: Latin alphabet No. 10, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin-10 or South-Eastern European. It was designed to cover Albanian, Croatian, Hungarian, Polish, Romanian, Serbian and Slovenian, but also French, German, Italian and Irish Gaelic (new orthography).ISO-8859-16 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. It was proposed as a different encoding similar to ISO 8859-1 with the missing French, Dutch and Turkish characters (note that the euro sign did not exist at the time), but that got rejected.

ISO/TS 19103

ISO/IEC 8820-5

ISO/TR 11941:1996 is a Korean romanization system used in ISO. It is not commonly used. One example of its use is in Unicode character names.It is very similar to Yale Romanization.

ISO/IEC 23008-2

ISO/IEC JTC 1/SC 34, Document description and processing languages is a subcommittee of the ISO/IEC JTC1 joint technical committee, which is a collaborative effort of both the International Organization for Standardization and the International Electrotechnical Commission, which develops and facilitates standards within the field of document description and processing languages. The international secretariat of ISO/IEC JTC 1/SC 34 is the Japanese Industrial Standards Committee (JISC) located in Japan.

ISO/IEC 8859-3:1988

ISO/IEC 21827

ISO/IEC JTC 1/SC 39 Sustainability for and by Information Technology is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of sustainability and resource efficiency through Information Technology.

ISO/IEC 8859-14:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 14: Latin alphabet No. 8 (Celtic), is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1998. It is informally referred to as Latin-8 or Celtic. It was designed to cover the Celtic languages, such as Irish, Manx, Scottish Gaelic, Welsh, Cornish, and Breton.ISO-8859-14 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. CeltScript made an extension for Windows called Extended Latin-8.

ISO/TC 176

ISO/PAS 28007:2012 was developed as an initiative by the maritime industry and based on a request by the International Maritime Organization to provide guidelines for ISO 28000-certified companies deploying Privately Contracted Armed Security Personnel (PCASP) on board ships.It was specifically developed for organisations operating in the Piracy High Risk Area in the Indian Ocean, usually providing security transits from the Suez Canal to Southeast Asia and the Indian subcontinent.

ISO/IEC 6937:2001, Information technology — Coded graphic character set for text communication — Latin alphabet, is a multibyte extension of ASCII, or rather of ISO/IEC 646-IRV. It was developed in common with ITU-T (then CCITT) for telematic services under the name of T.51, and first became an ISO standard in 1983. Certain byte codes are used as lead bytes for letters with diacritics (accents). The value of the lead byte often indicates which diacritic that the letter has, and the follow byte then has the ASCII-value for the letter that the diacritic is on. Only certain combinations of lead byte and follow byte are allowed, and there are some exceptions to the lead byte interpretation for some follow bytes. However, that no combining characters at all are encoded in ISO/IEC 6937. But one can represent some free-standing diacritics, often by letting the follow byte have the code for ASCII space.ISO/IEC 6937's architects were Hugh McGregor Ross, Peter Fenwick, Bernard Marti and Loek Zeckendorf.ISO6937/2 defines 327 characters found in modern European languages using the Latin alphabet. Non-Latin European characters, such as Cyrillic and Greek, are not included in the standard. Also, some diacritics used with the Latin alphabet like the Romanian comma are not included, using cedilla instead as no distinction between cedilla and comma below was made at the time.IANA has registered the charset names ISO_6937-2-25 and ISO_6937-2-add for two (older) versions of this standard (plus control codes). But in practice this character encoding is unused on the Internet.The ISO/IEC 2022 escape sequence to specify the right-hand side of the ISO/IEC 6937 character set is ESC - R (hex 1B 2D 52).

ISO/IEC JTC 1/SC 27 IT Security techniques is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 27 develops International Standards, Technical Reports, and Technical Specifications within the field of information and IT security.

ISO/R 9:1986

ISO/IEC 8859-15:1999

ISO/IEC 27040

ISO/TC 223 Societal security was a technical committee of the International Organization for Standardization formed in 2001 to develop standards in the area of societal security: i.e.

"nb"

ISO/IEC JTC 1/SC 37

Note: This special working group has been disbanded.

ISO/IEC 8859-15:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 15: Latin alphabet No. 9, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1999. It is informally referred to as Latin-9 (and was for a while called Latin-0).

National standards organisations

ISO/IEC 8859-9:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1989. It is informally referred to as Latin-5 or Turkish. It was designed to cover the Turkish language, designed as being of more use than the ISO/IEC 8859-3 encoding. It is identical to ISO/IEC 8859-1 except for these six replacements of Icelandic characters with characters unique to the Turkish alphabet:ISO-8859-9 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. In modern applications Unicode and UTF-8 are preferred. 0.1% of all web pages use ISO-8859-9 in February 2016.Microsoft has assigned code page 28599 a.k.a. Windows-28599 to ISO-8859-9 in Windows. IBM has assigned Code page 920 to ISO-8859-9.

ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications within the field of audio, picture, multimedia, and hypermedia information coding. The international secretariat of ISO/IEC JTC 1/SC 29 is the Japanese Industrial Standards Committee (JISC) located in Japan.

ISO/IEC 8652 Information technology — Programming languages — Ada is the international standard for the computer programming language Ada. It was produced by the Ada Working Group, ISO/IEC JTC1/SC22/WG 9, of the International Organization for Standardization (ISO).The latest edition is ISO/IEC 8652:2012, published 2012-12-10. The text of the earlier 1995 version of the standard, with Technical Corrigendum 1 and Amendment 1, is freely available for download and online reading.

ISO3V10

ISO/IEC 25010

ISO/TC 251

ISO/IEC 8859-11

ISO/IEC 8859-5

ISO/IEC 8652

ISO/IEC 27006

ISO/IEC 8859-10

ISO/TC251 is the ISO Technical Committee for Asset Management responsible for the development of the ISO 55000 family of standards. These standards define good practices in Asset Management and requirements for a management system. The standards apply to all types of assets and to all organizations. TC251 was created in March 2015 and currently (as of December 2016) includes members of 29 participating countries, plus 13 observer countries.

ISO646-CU

ISO/IEC 7942-4:1998

ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of telecommunications and information exchange between systems.

ISO/IEC 9797-1 Information technology – Security techniques – Message Authentication Codes (MACs) – Part 1: Mechanisms using a block cipher is an international standard that defines methods for calculating a message authentication code (MAC) over data.Rather than defining one specific algorithm, the standard defines a general model from which a variety of specific algorithms can be constructed. The model is based around a block cipher with a secret symmetric key.Because the standard describes a model rather than a specific algorithm, users of the standard must specify all of the particular options and parameter to be used, to ensure unambiguous MAC calculation.

ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts is an international standard that defines a structure for uniquely identifying organizations and parts thereof in computer data interchange and specifies the registration procedure to obtain an International Code Designator (ICD) value for an identification scheme.The standard consists of two parts:Part 1: Identification of organization identification schemes defines a structure for the identification of organizations and parts thereof.

ISO/IEC JTC 1/SC 27 IT Security techniques is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 27 develops International Standards, Technical Reports, and Technical Specifications within the field of information and IT security. Standardization activity by this subcommittee includes general methods, management system requirements, techniques and guidelines to address both information security and privacy. Drafts of International Standards by ISO/IEC JTC 1 or any of its subcommittees are sent out to participating national standardization bodies for ballot, comments and contributions. Publication as an ISO/IEC International Standard requires approval by a minimum of 75% of the national bodies casting a vote. The international secretariat of ISO/IEC JTC 1/SC 27 is the Deutsches Institut für Normung (DIN) located in Germany.

ISO/IEC 8859-15

ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/Hebrew alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings. ISO/IEC 8859-8:1999 from 1999 represents its second and current revision, preceded by the first edition ISO/IEC 8859-8:1988 in 1988. It is informally referred to as Latin/Hebrew. ISO/IEC 8859-8 covers all the Hebrew letters, but no Hebrew vowel signs.

ISO/IEC 6523

ISO/IEC 80000-2

ISO/IEC 21481

ISO/IEC 7942-4

ISO/IEC 7498-1

ISO/IEC 9293

ISO/IEC 27002 is an information security standard published by the International Organization for Standardization (ISO) and by the International Electrotechnical Commission (IEC), titled Information technology – Security techniques – Code of practice for information security management.The ISO/IEC 27000-series standards are descended from a corporate security standard donated by Shell to a UK government initiative in the early 1990s .

ISO/IEC 80000-12

ISO/IEC 26300

ISO/IEC 80000-11

ISO/IEC 7942-3:1999

ISO/IEC 27002 is an information security standard published by the International Organization for Standardization (ISO) and by the International Electrotechnical Commission (IEC), titled Information technology – Security techniques – Code of practice for information security management.The ISO/IEC 27000-series standards are descended from a corporate security standard donated by Shell to a UK government initiative in the early 1990s . The Shell standard was developed into British Standard BS 7799 in the mid-1990s, and was adopted as ISO/IEC 17799 in 2000. The ISO/IEC standard was revised in 2005, and renumbered ISO/IEC 27002 in 2007 to align with the other ISO/IEC 27000-series standards. It was revised again in 2013.ISO/IEC 27002 provides best practice recommendations on information security management for use by those responsible for initiating, implementing or maintaining information security management systems (ISMS). Information security is defined within the standard in the context of the C-I-A triad:the preservation of confidentiality (ensuring that information is accessible only to those authorized to have access), integrity (safeguarding the accuracy and completeness of information and processing methods) and availability (ensuring that authorized users have access to information and associated assets when required).

The ISO/IEC 27001 Lead Auditor certification consists of a professional certification for auditors specializing in information security management systems (ISMS) based on the ISO/IEC 27001 standard and ISO/IEC 19011. This certification is provided by accredited certification bodies or unaccredited ones. Accredited means having gone through an accreditation process via a national accreditation body such as American National Standards Institute.The training of lead auditors normally includes a classroom and exam portion and a requirement to have performed a number of ISO/IEC 27001 audits. Attending the course and passing the exam is not sufficient for an individual to use the credentials of Lead Auditor as professional and audit experience is required. If an individual wants to issue an ISO/IEC 27001 certificate of compliance then the audit must be done by a Lead Auditor working for an accredited certification body and done using all the rules of that certification body, which will need to adhere to ISO17021 and ISO27006.The course usually consists of around forty hours (four days) of training and a final exam of the fifth day. This certification is different from the ISO/IEC 27001 Lead Implementer certification which is targeted for information security professionals who want to implement the ISO/IEC 27001 standard rather than audit it, or the ISO/IEC 27005 Risk Manager certification which focuses only on the risk management portion of ISO/IEC 27001.The main benefit from achieving the ISO/IEC 27001 Lead Auditor certification is the recognition that the individual can be engaged by certification bodies to perform information management system audits under their direction and management system.The main ISO/IEC 27001 auditor certifications normally follow these designations:Provisional ISMS AuditorISMS Auditor/Internal AuditorLead ISMS Auditor

ISO/R 9

ISO/IEC JTC 1/SC 17

ISO/IEC 42010

ISO646-CN

ISO/IEC 8859-9:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1989. It is informally referred to as Latin-5 or Turkish. It was designed to cover the Turkish language, designed as being of more use than the ISO/IEC 8859-3 encoding.

ISO/TS16949

ISO/IEC 4909:2006 establishes specifications for financial transaction cards using track 3 and is intended to permit interchange based on the use of magnetic stripe encoded information. It specifies the data content and physical location of read/write information on track 3 and is to be used in conjunction with the relevant parts of ISO/IEC 7811 and ISO/IEC 7812.ISO/IEC 4909:2006 recognizes the need for formats of track 3 which can be used independently of, or in conjunction with, track 2 as defined in ISO/IEC 7813. This approach is intended to permit the greatest degree of flexibility within the financial community in facilitating international interchange.Using track 3 in conjunction with track 2 is a mode of operation in both on-line and off-line interchange environments. This mode of operation requires that the original encoded data on track 2 be read; the data on track 3 be read; and, if update is required, all the data on track 3 be rewritten.Independent use of track 3 is an alternative mode of operation permitting both on-line interchange and off-line interchange based on mutual agreement between interested parties. It requires reading only of the data on track 3 and, if update is required, the rewriting of all the data on track 3.

ISO/IEC 27003

ISO/TC 215

ISO/IEC 24727 is the first international standard to address the need for creation of a layered framework to support interoperability of smart cards providing identification, authentication, and (digital) signature services.

ISO/IEC 7816 is an international standard related to electronic identification cards with contacts, especially smart cards, managed jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).It is edited by the Joint technical committee (JTC) 1 / Sub-Committee (SC) 17, Cards and personal identification.The following describes the different parts of this standard.Note: abstracts and dates, when present, are mere quotations from the ISO website, and are neither guaranteed at the time of edition nor in the future.

ISO/IEC 9592

ISO/IEC 29119

ISO/IEC binary prefix

ISO646-DK

ISO/IEC 8859-7:2003

ISO/IEC 26907

ISO/PAS 28000 – Specification for security management systems for the supply chain

ISO646-CA

ISO/TC 68

ISO12

ISO2700X

ISO/IEC 26908

ISO/IEC JTC 1/SC 6

ISO/IEC 27000 is part of a growing family of ISO/IEC Information Security Management Systems (ISMS) standards, the 'ISO/IEC 27000 series'. ISO/IEC 27000 is an international standard entitled: Information technology — Security techniques — Information security management systems — Overview and vocabulary.The standard was developed by sub-committee 27 (SC27) of the first Joint Technical Committee (JTC1) of the International Organization for Standardization and the International Electrotechnical Commission.ISO/IEC 27000 provides:An overview of and introduction to the entire ISO/IEC 27000 family of Information Security Management Systems (ISMS) standards.A glossary or vocabulary of fundamental terms and definitions used throughout the ISO/IEC 27000 family.ISO/IEC 27000 is available via the ITTF website. (free download)

ISO/IEC JTC1/SC2/WG2

ISO/IEC JTC 1/SC 28 Office equipment is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications within the field of office equipment and products, and systems composed of combinations of office equipment. The group’s main focus lies within the area of printers and copiers. The international secretariat of ISO/IEC JTC 1/SC 28 is the Japanese Industrial Standards Committee (JISC) located in Japan.

ISO/IEC JTC 1/SC 27

ISO/IEC JTC 1/SC 25 Interconnection of information technology equipment is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1, of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of interconnection of information technology equipment.

ISO/IEC 27006, part of a growing family of ISO/IEC Information Security Management System (ISMS) standards, the 'ISO/IEC 27000 series', is an information security standard published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It is titled Information technology - Security techniques - Requirements for bodies providing audit and certification of information security management systems.ISO/IEC 27006 lays out formal requirements for accredited organizations which certify other organizations compliant with ISO/IEC 27001.It effectively replaces EA 7/03 (Guidelines for the Accreditation of bodies operating certification/ registration of. Information Security Management Systems).The standard helps ensure that ISO/IEC 27001 certificates issued by accredited organizations are meaningful and trustworthy, in other words it is a matter of assurance.

ISO/IEC 7942-2:1997

ISO/R 9:1968

ISO/IEC 8859-10:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 10: Latin alphabet No. 6, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1992. It is informally referred to as Latin-6. It was designed to cover the Nordic languages, deemed as being of more use for them than ISO 8859-4.ISO-8859-10 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. Microsoft has assigned code page 28600 a.k.a. Windows-28600 to ISO-8859-10 in Windows. IBM has assigned Code page 919 to ISO-8859-10.

ISO/IEC 60083-3

English, French

The ISO/IEC 27000-series (also known as the 'ISMS Family of Standards' or 'ISO27k' for short) comprises information security standards published jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).The series provides best practice recommendations on information security management - the management of information risks through information security controls - within the context of an overall information security management system (ISMS), similar in design to management systems for quality assurance (the ISO 9000 series), environmental protection (the ISO 14000 series) and other management systems.The series is deliberately broad in scope, covering more than just privacy, confidentiality and IT/technical/cybersecurity issues.

ISO/IEC 80000-1

ISO/IEC 9075

ISO/IEC/IEEE 42010 Systems and software engineering — Architecture description is an international standard for architecture descriptions of systems and software.

ISO/IEC 8632

ISO/R

ISO/IEC JTC 1/SC 36 Information Technology for Learning, Education and Training is a standardization subcommittee (SC), which is part of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of information technology (IT) for learning, education and training (LET). ISO/IEC JTC 1/SC 36 was established at the November 1999 ISO/IEC JTC 1 plenary in Seoul, Korea. The subcommittee held its first plenary meeting in March 2000 in London, United Kingdom. The international secretariat of ISO/IEC JTC 1/SC 36 is the Korean Agency for Technology and Standards (KATS), located in the Republic of Korea.

ISO/IEC 27040 is part of a growing family of International Standards published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) in the area of security techniques; the standard is being developed by Subcommitee 27 (SC27) - IT Security techniques of the first Joint Technical Committee 1 (JTC 1) of the ISO/IEC.

ISO/IEC JTC 1/SC 39

ISO646-GB

ISO/IEC 33001

ISO/IEC 27000

ISO/IEC 8859-4:1988

ISO/IEC JTC1/SC36

ISO/TC 184/SC 4

ISO2700x

ISO639-1

ISO/IEC 4909

ISO/IEC 80000-5

ISO/PAS 28000

ISO/IEC 24707

ISO/IEC 8859-2:1999

ISO/IEC 23003

ISO/IEC 88591

ISO/IEC 8859-9:1989

ISO646-ES

ISO646-HU

ISO/IEC 27001 Lead Auditor

ISO/IEC 8859-9

ISO/TC 292 Security and resilience a technical committee of the International Organization for Standardization formed in 2015 to develop standards in the area of security and resilience.In June 2014 the Technical management Board of ISO (TMB) took the decision to create a new ISO Technical committee called ISO/TC 292 where three committees were merged into one.

ISO/IEC 8859-13:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 13: Latin alphabet No. 7, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1998. It is informally referred to as Latin-7 or Baltic Rim. It was designed to cover the Baltic languages, and added characters used in the Polish language missing from the earlier encodings ISO 8859-4 and ISO 8859-10. Unlike these two, it does not cover the Nordic languages.ISO-8859-13 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429.Microsoft has assigned code page 28603 a.k.a. Windows-28603 to ISO-8859-13.

ISO639

ISO/IEC 8859-6

ISO/IEC 8859-13:1998

ISO/TC37

ISO4217

ISO/IEEE 11073

ISO/IEC 7942-1

ISO/IEC JTC 1/SC 38

ISO/IEC JTC 1/SC 25

ISO/IEC 646:1991

ISO/IEC 8859-8:1999

ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications in the field of automatic identification and data capture techniques. The subcommittee had its first plenary in 1996, where it established its original three working groups. Additional working groups were established at subsequent plenaries such as ISO/IEC JTC 1/SC 31 WG 4 RFID, which was established at the third plenary in January 1998. The international national secretariat of ISO/IEC JTC 1/SC 31 is the American National Standards Institute (ANSI) located in the United States.

Plenary meeting

ISO/IEC 7942-3

ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts is an international standard that defines a structure for uniquely identifying organizations and parts thereof in computer data interchange and specifies the registration procedure to obtain an International Code Designator (ICD) value for an identification scheme.The standard consists of two parts:Part 1: Identification of organization identification schemes defines a structure for the identification of organizations and parts thereof. The components of this structure are the following:an International Code Designator (ICD) value, which uniquely identifies the authority which issued the code to the organization, up to 4 digitsan organization identifier, up to a maximum of 35 charactersan (optional) organization part identifier (OPI), up to a maximum of 35 characters (An organization part can be any kind of entity within an organization.)an (optional) OPI source indicator, 1 digit, specifying who attributed the OPIPart 2: Registration of organization identification schemes defines the registration procedure for ICD values. This includes:the registration authority for ICD values is Farance Inc. on behalf of the American National Standards Institute (ANSI).the specific procedures for the allocation and deletion of ICD valuesthe contents of the register/list of the registered identification schemes(A list of allocated ICD values is available here. An up-to-date list may also be acquired by contacting the registration authority.)Further information concerning ISO/IEC 6523 and on how to obtain an ICD value can be found here.ISO/IEC 6523 forms the basis of OSI naming under ISO/IEC 8348. It also forms the 1.3 object identifier (OID) tree.The most widespread standard compliant with ISO 6523 norm is the identifier called "Global Location Number" (GLN), developed by GS1 company members. In B2B exchanges, it is widely used by companies to identify locations or functions within a location (for example : a factory, the accounting department of a company, an administration, a warehouse, a delivery address, ...). It has become a key to exchange business messages (orders, invoices, ...) using UN/EDIFACT specifications.The ebCore Party Id Type Technical Specification was issued by the Organization for the Advancement of Structured Information Standards (OASIS). It was elaborated by the OASIS ebXML Core Technical Committee and it specifies a Uniform Resource Name (URN) namespace for organization identifiers. It bases upon ISO/IEC 6523, ISO 9735 and ISO 20022.

ISO/TC 211

The ISO/IEC 27000-series (also known as the 'ISMS Family of Standards' or 'ISO27k' for short) comprises information security standards published jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).The series provides best practice recommendations on information security management - the management of information risks through information security controls - within the context of an overall information security management system (ISMS), similar in design to management systems for quality assurance (the ISO 9000 series), environmental protection (the ISO 14000 series) and other management systems.The series is deliberately broad in scope, covering more than just privacy, confidentiality and IT/technical/cybersecurity issues. It is applicable to organizations of all shapes and sizes. All organizations are encouraged to assess their information risks, then treat them (typically using information security controls) according to their needs, using the guidance and suggestions where relevant. Given the dynamic nature of information risk and security, the ISMS concept incorporates continuous feedback and improvement activities to respond to changes in the threats, vulnerabilities or impacts of incidents.The standards are the product of ISO/IEC JTC1 (Joint Technical Committee 1) SC27 (Subcommittee 27), an international body that meets in person twice a year.The ISO/IEC standards are sold directly by ISO, mostly in English and French. Sales outlets associated with various national standards bodies also sell directly translated versions in other languages.

ISO646-ES2

ISO/IEC 7811

ISO/IEC JTC 1/SC 23

The ISO/TS 80004 series of standards, from the International Organization for Standardization, describe vocabulary for nanotechnology and its applications. These were largely motivated by health, safety and environment concerns, many of them originally elaborated by Eric Drexler in his 1985 Engines of Creation and echoed in more recent research [1].

ISO/IEC 5218

ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications in the field of automatic identification and data capture techniques.

ISO/IEC 8859-16

ISO/IEC 27040 is part of a growing family of International Standards published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) in the area of security techniques; the standard is being developed by Subcommitee 27 (SC27) - IT Security techniques of the first Joint Technical Committee 1 (JTC 1) of the ISO/IEC. A major element of SC27's program of work includes International Standards for information security management systems (ISMS), often referred to as the 'ISO/IEC 27000-series'.The full title of ISO/IEC 27040 is Information technology — Security techniques — Storage security.

ISO/IEC 8859-3:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin alphabet No. 3, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin-3 or South European. It was designed to cover Turkish, Maltese and Esperanto, though the introduction of ISO/IEC 8859-9 superseded it for Turkish. The encoding remains popular with users of Esperanto, though use is waning as application support for Unicode becomes more common.ISO-8859-3 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. Microsoft has assigned code page 28593 a.k.a. Windows-28593 to ISO-8859-3 in Windows. IBM has assigned code page 913 to ISO 8859-3.

ISO/IEC 27001:2005, part of the growing ISO/IEC 27000 family of standards, was an information security management system (ISMS) standard published in October 2005 by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Its full name is ISO/IEC 27001:2005 – Information technology – Security techniques – Information security management systems – Requirements. It was superseded, in 2013, by ISO/IEC 27001:2013.ISO/IEC 27001 formally specifies a management system that is intended to bring information security under explicit management control. Being a formal specification means that it mandates specific requirements. Organizations that claim to have adopted ISO/IEC 27001 can therefore be formally audited and certified compliant with the standard (more below).

ISO/TC 211 Geographic information/Geomatics

ISO/IEC JTC 1/SC 38 Cloud Computing and Distributed Platforms is a standardization subcommittee, which is part of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 38 was formed at the October 2009 ISO/IEC JTC 1 Plenary Meeting in Tel Aviv via approval of Resolution 36.

ISO/IEC JTC 1/SC 28 Office equipment is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications within the field of office equipment and products, and systems composed of combinations of office equipment.

ISO 27001 Lead Implementer is a professional certification for professionals specializing in information security management systems (ISMS) based on the ISO/IEC 27001 standard. This professional certification is intended for information security professionals wanting to understand the steps required to implement the ISO 27001 standard (as opposed to the ISO 27001 Lead Auditor certification which is intended for an auditor wanting to audit and certify a system to the ISO 27001 standard).This certification is provided by numerous organizations. Some are currently not certified by any personnel certification body while others are certified by accredited certification bodies. Certified ISO 27001 implementation courses should be accredited to the ISO/IEC 17024 standard.

ISO/IEC JTC 1/SC 17/WG 1 is a working group within ISO/IEC JTC1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that facilitates standards development within the field of cards and personal identification. A national delegation of experts from various countries meet in person at WG1 to discuss and debate items detailed in a meeting agenda until a consensus is reached. These items include: draft standards, draft test methods, questions from the industry, proposals for new work items or other aspects relating to the Standards and Test Methods that WG1 bears responsibility for. WG1 meetings are usually held three times a year, typically at the beginning of March, the end of June, and at the beginning of October for a period of 2–3 days. The October meeting is typically held in the days just prior to the SC17 Plenary and at the same location.

Note: This special working group has been disbanded.ISO/IEC JTC 1/SWG on Accessibility (SWG-A) is a special working group of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) that promotes and facilitates standards development within the field of information and communications technology (ICT) accessibility. ISO/IEC JTC 1/SWG-A was formed at the October 2004 ISO/IEC JTC 1 Plenary Meeting in Berlin, Germany via approval of Resolution 24. The special working group was created as a response to the standardization demands regionally, locally, and globally, in the field of ICT for accessibility. The international secretariat of ISO/IEC JTC 1/SWG-A is administered by ITI/INCITS acting on behalf of the American National Standards Institute (ANSI), located in the United States. The first meeting of the special working group took place in Sheffield, United Kingdom in April 2005, where the group’s terms of reference were confirmed and its original two task groups established.

ISO/IEC JTC 1/SC 2

ISO/IEC JTC 1/SC 34

ISO/TC 223 Societal security was a technical committee of the International Organization for Standardization formed in 2001 to develop standards in the area of societal security: i.e. protection of society from and response to incidents, emergencies, and disasters caused by intentional and unintentional human acts, natural hazards, and technical failures.The sinking of the Russian submarine Kursk to the bottom of the Barents Sea in 2000 can be cited as a major impetus for the formation of ISO/TC 223. The international salvage operation that followed the accident provided painful evidence that the international community lacked the tools necessary to cooperate effectively in emergency situations, resulting in an initiative from the Russian standards organization, GOST, to establish ISO/TC 223. Originally titled Civil defence, the committee was created to standardize international emergency procedures.The initiative lay dormant for some time. However, terrorist actions, including the 9/11 attacks on New York and Washington, as well as a surge in natural disasters in recent years, led ISO to conduct a large-scale assessment of the role of standardization in the security field. One important decision was to put ISO/TC 223 into action. In 2005 the chairmanship of the committee was taken over by SIS, the Swedish Standards Institute. To better reflect its ambition to take a broader approach toward disruptive incidents that threaten the civil society, the committee was renamed Societal security.ISO/TC 223 was actively developing a series of international standards for more than 8 years. In 2014, the Technical Management Board of ISO decided to merge ISO/TC 223 with other committees in the area of security for better coordination. The new committee started on the 1st of January 2015 and is called ISO/TC 292 Security

ISO/IEC TR 14252

ISO/IEC 9899

ISO/IEC 27001:2013 is an information security standard that was published in September 2013 It supersedes ISO/IEC 27001:2005, and is published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) under the joint ISO and IEC subcommittee, ISO/IEC JTC 1/SC 27. It is a specification for an information security management system (ISMS).

ISO/IEC 8859-5:1988

ISO/IEC JTC 1/SC 36 Information Technology for Learning, Education and Training is a standardization subcommittee (SC), which is part of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of information technology (IT) for learning, education and training (LET).

ISO/TS 19104

ISO/IEC 8613