ff0000

BSV Limburgia

BSQR

CD Aspaym CyL

BS 546

BSVY

BSV Stahl Brandenburg

ffffff

BSPNU

BSV Halle-Ammendorf is a German association football club from Ammendorf in the city of Halle, Saxony-Anhalt.

BSS Industrial is a British specialist distributor of heating, ventilation, pipeline and mechanical services equipment based in Leicester. The business was previously part of The BSS Group plc until that group's acquisition by Travis Perkins in December 2010.

BSUIR

BS 5

white

BRU

The 2009 BSN season was the 89th season of the Baloncesto Superior Nacional (BSN), the men's basketball league of Puerto Rico. It began in May 2009 and ended in August of the same year. This season saw the revival of an old rivalry, when in the finals the Vaqueros de Bayamon met with the Piratas de Quebradillas, with the Vaqueros winning.

BSNUPF (Everclear)

BS 8904

British Standard 8878 (BS 8878) is a Web Accessibility Code of Practice which was published by the BSI Group (also known as the British Standards Institution or BSI). The standard was officially launched on 7 December 2010.BS 8878 defines a process for creating and embedding a web accessibility strategy within an organisation. It is written in non technical language and is aimed at people within an organisation who have responsibilities for web strategy or development.The term “web product” is introduced in BS 8878 to describe any web-based service. It encompasses web sites, web applications, software as a service, cloud based services and other services accessed via a web browser.BS 8878 is not intended as a competitor or alternative to the WCAG standard developed by W3C WAI. Rather, it defines the processes needed in the planning and deployment of accessible web products. This can include the selection of WCAG guidelines. BS 8878 is part of the UK government's broader self-regulatory approach to standardization.

BSN (disambiguation)

₹351,820 million

BSV Luftikus

BS 2000 (album)

BSNL Mobile (formerly CellOne) is an Indian mobile network operator, operated by the public enterprise BSNL. It provides both pre-paid and post-paid mobile services as well as many value added services. BSNL Mobile has a pan-India presence with presence in all the 21 telecom circles in India.

BS Albert Odyssey

BS 6008

BSV Halle-Ammendorf

BSNL Mobile

BS 6192

BS (control code)

BSV Olper 2000

BS 8904:2011 - Guidance for community sustainable development is a standard created by the British Standards Institution (BSI), which focuses on implementing sustainability at the community level. The standard provides guidance that assists community leaders in understanding and implementing sustainable development within their organisational structure and throughout the community itself. This helps them strengthen communities and promote lasting economic and social stability and reduce their environmental impacts.BS 8904 explains in detail how to agree principles, get others involved, define key issues, identify community capabilities, create a plan and put it into action, and to measure, learn and improve. Through stakeholder engagement, communities and community groups can identify the most pressing sustainable development issues, set objectives and targets for improvement and implement a plan of action. By using this standard, communities embed sustainable development principles into daily activities. This creates a continually evolving body with the assistance of BS 8904’s innovative and comprehensive maturity matrix.

BS 8494

BSNL DataOne

Zayadi Mohammad

BS Chandrasekhar

BSSA

BSPN 360

BSOM

BSPN Plus

The BSV Luftikus was a German competition glider, designed for economy of construction and first flown in 1929. From 1929 to 1931 it took part in the annual national gliding contests held on the Wasserkuppe, often known as the Rhön contests.

BSWW Rankings

BSTFA

BSR Valladolid, more commonly known by its sponsorship naming Fundación Grupo Norte, is a wheelchair basketball team based in Valladolid, Castile and Léon, Spain.

BS 7567

Saldi Sohadey Salim

BS 7910, guide to methods for assessing the acceptability of flaws in metallic structures, is a British Standard code of practice for the assessment of flaws (weld defects in particular) using fracture mechanics principles. The technique is also referred to as an engineering critical assessment (ECA) or damage tolerance, and is complementary to other methods of weld quality assurance.The standard was first introduced in 1980 as a fracture and fatigue assessment procedure, when it was known as PD 6493. Its name was changed to BS 7910 following a revision in 1999. The standard has undergone numerous subsequent revisions, the most recent being in 2013.Flaws (such as fabrication cracks, fatigue cracks, creep cracks and corrosion damage) can arise during the manufacture and use of metallic components. For safety-critical items such as aircraft, pipelines and pressure vessels, the failure of a single component due to the presence of a flaw can threaten human life, as well as having severe economic and environmental consequences. Other flaws may be harmless, as they will not lead to failure during the lifetime of the component. Replacement or repair of such flaws is economically wasteful. A fitness-for-service procedure such as BS 7910 allows flaws to be evaluated consistently and objectively, using fracture mechanics principles.

BSRC Field, Panaga

The BSWW Mundialito, sometimes simply known as Mundialito, is an annual international beach soccer tournament that takes place between few select countries, which are invited to play at the tournament organized by Beach Soccer Worldwide (BSWW). First played in 1994 at Copacabana beach, Rio de Janeiro, Brazil, the competition was reignited in 1997 in Portugal, where it has been held ever since.

FF6600

BSSST...Tišinčina

BSPN Zone

The BSWW Mundialito, sometimes simply known as Mundialito, is an annual international beach soccer tournament that takes place between few select countries, which are invited to play at the tournament organized by Beach Soccer Worldwide (BSWW). First played in 1994 at Copacabana beach, Rio de Janeiro, Brazil, the competition was reignited in 1997 in Portugal, where it has been held ever since. Few nations have won the tournament, those being only Brazil, Portugal, United States and Spain.The first Mundialito competition to consist of club teams took place in March 2011, known as the Mundialito de Clubes.

BS 2000

BS 1363

BSPN PPV

Berlin Segelflug-Verein

_shouldersonblack

BSSF

BS 11

BSPT

BSV Schwenningen

BSS

BSNL Broadband is an Internet access service from state-owned Bharat Sanchar Nigam Limited (BSNL) available in India since 14 January 2005. Until 30 September 2007 it was known as Data One.BSNL is commissioning a multi-gigabit, multi-protocol, IP infrastructure through National Internet Backbone-II (NIB-II), that will provide services through the same backbone and broadband access network.

BSU-CICS

Ya Vidhya Sa Vimukthaya

BSNL Mobile (formerly CellOne) is an Indian mobile network operator, operated by the public enterprise BSNL. It provides both pre-paid and post-paid mobile services as well as many value added services. BSNL Mobile has a pan-India presence with presence in all the 21 telecom circles in India. BSNL Mobile provides all of India with roaming access, including Delhi and Mumbai, and International roaming access to more than 300 networks across the world.The company's CellOne network (GSM/GPRS) was launched in late 2002 and has coverage in major cities and towns and more places are being covered. BSNL Mobile offers both GSM as well as CDMA prepaid and postpaid services. CellOne was renamed BSNL Mobile in 2007.

BS Asahi

BSPN HD

BSS segment

BSPN2

FFFFFF

no RFC yet

BSNL

BSS Industrial

BSU Pavilion

BS 857

BS 1852 color code

BSSRS

BST+1

BS 5454, "Recommendations for the storage and exhibition of archival documents" was a British Standard for the construction of building repositories for archive collections. It specified security standards, fire resistance and structural qualities for document storage buildings and their locations, environmental parameters (temperature and humidity ranges) designed to protect documents, shelving schemes, and materials for document containers. It was withdrawn in 2012, being replaced by BSI PD 5454:2012 Guide for the Storage and Exhibition of Archival Materials.

BSPP (disambiguation)

BS 1852 letter and digit code

Skeletal formula of BSTFA

MVP

BSTV (disambiguation)

BST-COFDM

BSY

BSR Towers

BS 5950 is a withdrawn British Standard for the design, fabrication and erection of structural steelwork. It does not apply to bridges, which are covered by BS 5400. BS 5950 replaced BS 449, which used a permissible stress approach, and uses limit state design methods. It is written for use in the UK but can be used worldwide. It was superseded by BS EN 1993 on 30 March 2010 and withdrawn.///.

BSSAP

BSPP is a compound used in scientific research which acts as a positive allosteric modulator at the GABAB receptor. It has a synergistic effect with GABAB agonists such as baclofen at GABAB autoreceptors but not heteroreceptors, suggesting it may be useful for distinguishing between these GABAB receptor subtypes.

Fundación Grupo Norte

BS (card game)

Brahmananda Swami Sivayogi Gurukulam Higher Secondary School is an ISO 9001:2008 Certified smart school [Rgn No: Q133018]. It is situated in Alathur in Palakkad district. It is 20 kilometers away from Palakkad on the side of NH-47. The school offers education from LKG to +2 grades.

BSU vs. FSU

BSPP (drug)

BS 2961

BSSR

BS 1362

BS 8878

BSTW

nat championships

One

BSPN Deportes

Azamri Zainal

BSPSh

December 2009

_Beitar2

BS 3

BSS (disambiguation)

BS (disambiguation)

BS 8110 is a British Standard for the design and construction of reinforced and prestressed concrete structures. It is based on limit state design principles. Although used for most civil engineering and building structures, bridges and water-retaining structures are covered by separate standards (BS 5400 and BS 8007).In 2010 BS 8110 was superseded by EN 1992 (Eurocode 2) although parts of the standard have been retained in the National Annex of the Eurocode.

_blackstripes

BS 5930:2015, "the code of practice for site investigations", is a UK code of practice which came into effect on 31 July 2015 British Standards Institution.It supersedes BS5930:1999+A2:2010, which itself supersedes BS 5930:1981 which in turn supersedes CP2001: 1957 "Site investigations".The stated purpose of the document is to "...deal(s) with the investigation of sites for the purposes of assessing their suitability for the construction of civil engineering and building works and of acquiring knowledge of the characteristics of a site that affect the design and construction of such work...".The document gives guidance on legal, environmental and technical matters relating to site investigation and includes a section on the description and classification of soils and rocks.BS5930:1999 was amended in December 2007 to avoid conflict with the newly introduced Eurocode 7 "Geotechnical Design" and the code is to be retained as a normative reference.BS5930:2015 is a further full revision of the standard, and introduces some principal changes including: compliance with BS EN 1997-1 and BS EN 1997-2 and related test standards; new information on geophysical surveying and ground testing, and updated guidance on desk studies, field reconnaissance, ground investigations on contaminated ground and ground affected by voids; the requirements of data capture in the field and in the inclusion of this in reporting.Section 1 Preliminary Considerations Pages 3–6Seven factors to be cognizant of at this stage are: suitability of the site for the proposed works, economic and adequacy of design, optimum method of construction with reference to potential issues due to ground and groundwater.

BS 8904:2011 - Guidance for community sustainable development is a standard created by the British Standards Institution (BSI), which focuses on implementing sustainability at the community level. The standard provides guidance that assists community leaders in understanding and implementing sustainable development within their organisational structure and throughout the community itself.

BS 5852

BS 5867

BSU Broncos

The BSR Towers are a complex of three towers, two built on opposite sides of Derech Ben Gurion road dividing the cities of Bnei Brak and Ramat Gan near Tel Aviv in Israel, and a third building set to be completed in 2012 on Kinneret Street. Tower 1 is located in Ramat Gan and stands at 98 meters over 24 floors, whilst Tower 2 stands at 121 meters, thus being the tallest building in Bnei Brak with 27 floors.

BST2 (gene)

BSS 601

BSO Classics

Muhaimin Mappy

BSWW Beach Soccer rankings

Syafiq Salleh

BSSN formalism

BSPP

BST2

BSNBAOTV

Quality is the motto

BSN glasspack

BS 25999 was BSI's standard in the field of Business Continuity Management (BCM). It was withdrawn in 2012 (part 2) and 2013 (part 1) following the publication of the international standards ISO 22301 - ″Societal Security — Business continuity management systems — Requirements″ and ISO 22313 - ″Societal Security — Business continuity management systems — Guidance″Upon its publication in 2007 BS 25999 replaced PAS 56, a Publicly Available Specification, published in 2003 on the same subject.

BS 6312

BSSC

BSPN Classic

BS 1363 mains plug

BSRI

_blackshoulders

BSSST…Tišinčina!

May 1929

BS Arkanoid

BS 5295

BSV (disambiguation)

BSPF

BSS-702MP

BS BolticGöta

BSPN 2

BS 7988 is a standard originally published by the British Standards Institution (BSI) in 2002. It is a code of practice for the use of information technology (IT) in the delivery of assessments, and gives guidance and good practice in using computers to deliver assessments.

Jesse Pellot

BS 7799 was a standard originally published by BSI Group (BSI) in 1995. It was written by the United Kingdom Government's Department of Trade and Industry (DTI), and consisted of several parts.The first part, containing the best practices for Information Security Management, was revised in 1998; after a lengthy discussion in the worldwide standards bodies, was eventually adopted by ISO as ISO/IEC 17799, "Information Technology - Code of practice for information security management." in 2000. ISO/IEC 17799 was then revised in June 2005 and finally incorporated in the ISO 27000 series of standards as ISO/IEC 27002 in July 2007.The second part to BS 7799 was first published by BSI in 1999, known as BS 7799 Part 2, titled "Information Security Management Systems - Specification with guidance for use." BS 7799-2 focused on how to implement an information security management system (ISMS), referring to the information security management structure and controls identified in BS 7799-2, which later became ISO/IEC 27001. The 2002 version of BS 7799-2 introduced the Plan-Do-Check-Act (PDCA) (Deming quality assurance model), aligning it with quality standards such as ISO 9000. BS 7799 Part 2 was adopted by ISO as ISO/IEC 27001 in November 2005.BS 7799 Part 3 was published in 2005, covering risk analysis and management. It aligns with ISO/IEC 27001.

BSNL Broadband

BSTAR

BS 7910

BSV SW Rehden

Muhammad Azizi Rasyid

in construction

BSP (file extension)

Offices

BS BolticGota

BSPN on ABC

Brunei Shell Recreational Club Football Team
Brunei Shell Recreational Club FT or simply BSRC FT is a football team from Brunei. The team represents the football department of Brunei Shell Recreational Club situated in Panaga, Belait.Brunei Shell Petroleum started entering a football team for Brunei's domestic football competition the B-League in 2004, finishing 10th in the newly organized second level Premier Two. They managed to play in the top-flight in only two seasons, 2007/08 and 2009/10.The club was renamed as BSRC FT in 2011 and now play in the Brunei Premier League.

BSZ

April 2009 - July 2009

BS 2000 is the name of a musical side project of Beastie Boys' Adam "Adrock" Horovitz and Amery "AWOL" Smith also with tracks featuring Janay North. In 1997, BS 2000 released their vinyl-only self-titled debut. BS 2000 later released a limited-edition vinyl/CD, Buddy, in 2000 and Simply Mortified on vinyl and CD in 2001.Simply Mortified was the final release through the Beastie Boys' Grand Royal label.Their song "The Scrappy" was featured on the American and European versions of the Xbox video game, Jet Set Radio Future.

BSPNEWS

BS Bokujō Monogatari

BSRIA (it takes its name from the initial letters of the Building Services Research and Information Association) is a UK-based testing, instrumentation, research and consultancy organisation, providing specialist services in construction and building services engineering. It is a not-for-profit, member-based association, with over 650 member companies; related services are delivered by a trading company, BSRIA Limited.

BSNES

BSRF-13

BSX (disambiguation)

Group A
Playoffs

2,6-di-tert-butyl-4-{[1-(hydroxymethyl)cyclopentyl]methyl}phenol

BSON /ˈbiːsən/ is a computer data interchange format used mainly as a data storage and network transfer format in the MongoDB database. It is a binary form for representing simple data structures, associative arrays (called objects or documents in MongoDB), and various data types of specific interest to MongoDB. The name "BSON" is based on the term JSON and stands for "Binary JSON".

BSTDC

minimum, at

BSS-702

BSN

BSPN Deportes Radio

Govt. Un-Aided Management

BSUO

BS 5993 is a British Standard specifying the construction details, dimensions, quality and performance of cricket balls.BS 5993:1994 Specification for cricket balls was published on 15 January 2005 and confirmed on 1 October 2012. It replaces BS 5993:1987.

Amir Safwan Haminuddin

BSSST...Tisincina!

BSOR

Regular season

Kamarul Rambli

Windhund

Afi Azizian Haminuddin

The BSR Towers are a complex of three towers, two built on opposite sides of Derech Ben Gurion road dividing the cities of Bnei Brak and Ramat Gan near Tel Aviv in Israel, and a third building set to be completed in 2012 on Kinneret Street. Tower 1 is located in Ramat Gan and stands at 98 meters over 24 floors, whilst Tower 2 stands at 121 meters, thus being the tallest building in Bnei Brak with 27 floors. Both buildings were completed in 2004, and were designed by Mor Architects and Moore Yaski Sivan Architects.

Swami Nirmalananda Yogi

BSV Stahl Brandeburg

BS 8110

Privately held company

BSS Segment

BS 7910, guide to methods for assessing the acceptability of flaws in metallic structures, is a British Standard code of practice for the assessment of flaws (weld defects in particular) using fracture mechanics principles.

Kindimukku, Alathur

BS 5750

BS 2000 is the name of a musical side project of Beastie Boys' Adam "Adrock" Horovitz and Amery "AWOL" Smith also with tracks featuring Janay North. In 1997, BS 2000 released their vinyl-only self-titled debut.

BSSS

BSN season 2008

BSP thread

Brunei Shell Recreational Club FT or simply BSRC FT is a football team from Brunei. The team represents the football department of Brunei Shell Recreational Club situated in Panaga, Belait.Brunei Shell Petroleum started entering a football team for Brunei's domestic football competition the B-League in 2004, finishing 10th in the newly organized second level Premier Two.
Mohamad Faizul Zaini

BSU Faculty of International Relations

BSPNHD

BS 5930:2015, "the code of practice for site investigations", is a UK code of practice which came into effect on 31 July 2015 British Standards Institution.It supersedes BS5930:1999+A2:2010, which itself supersedes BS 5930:1981 which in turn supersedes CP2001: 1957 "Site investigations".The stated purpose of the document is to "...deal(s) with the investigation of sites for the purposes of assessing their suitability for the construction of civil engineering and building works and of acquiring knowledge of the characteristics of a site that affect the design and construction of such work...".The document gives guidance on legal, environmental and technical matters relating to site investigation and includes a section on the description and classification of soils and rocks.BS5930:1999 was amended in December 2007 to avoid conflict with the newly introduced Eurocode 7 "Geotechnical Design" and the code is to be retained as a normative reference.BS5930:2015 is a further full revision of the standard, and introduces some principal changes including: compliance with BS EN 1997-1 and BS EN 1997-2 and related test standards; new information on geophysical surveying and ground testing, and updated guidance on desk studies, field reconnaissance, ground investigations on contaminated ground and ground affected by voids; the requirements of data capture in the field and in the inclusion of this in reporting.Section 1 Preliminary Considerations Pages 3–6Seven factors to be cognizant of at this stage are: suitability of the site for the proposed works, economic and adequacy of design, optimum method of construction with reference to potential issues due to ground and groundwater. The effect of changes to the ground and environment due to the works, and, therefore the effect on the works from these changes. Consideration of suitability on a selection of sites. And finally, the existing works and their implications. If a site has been used in the past, this is a major factor in the investigation, mining, quarrying, landfill or waste disposal, industrial usages, archaeological or ecological factors may all have a bearing on the intended works. The cost of an SI is low relative to the project cost and when conducted thoroughly can be a significant saving later. Investigations should evaluate the nature of the ground and groundwater. The size and nature of the works will have a bearing on the investigations as will its former use as a site or contamination of ground or groundwater. It will be considered in 3 stages. First a desk study to collate the information above as far as possible. Where a site is contaminated it is appropriate at this stage to plan site safety procedures for any further investigations. Planning the details of further investigations is appropriate too. Existing records, local authorities, industry, libraries, present or past OS maps and aerial photography or even anecdotal information are to be used. A site reconnaissance should also be conducted at this stage and includes a thorough visual inspection of any exposed cuttings and note taken of level of vegetation. The surroundings should also be noted. Second, a more detailed investigation is undertaken and finally a construction review – these shall be discussed later.Section 2 Ground investigations Pages 7–23This is a natural follow on from the desk study, the objectives are similar – acquiring sufficient information for design, assessing the hazards. Depending on the works the investigations will differ i.e. defects of existing works, slope failure or new works. Soil profile and groundwater condition should be established. Temporary or permanent changes should be investigated this involves changes in stresses and strains, moisture content, strength and compressibility. Certain areas will have old mines and underground cavities which need investigation. The ground investigation should be given enough time to be conducted before works are designed, this may involve in predicting ground condition at various times of the year. Due to the potential flexibility and size of an investigation, adequate supervision, equipment, testing, personnel, and audits should be provided in a safe manner. The extent of the GI can depend on many variables such as, character of site, availability of equipment and personnel and costs of methods. It should cover all ground affected by stresses and strains to an appropriate depth and breadth. Excavations, boreholes probing and geophysical surveying are used to investigate the ground. Intrusive investigations should be sited, spaced and backfilled with care. The GI should give sufficient information to make good decisions on design, construction material selection. The condition and accessibility on site may affect the equipment used. As the determination of groundwater conditions is important – the use of piezometers are at times used. Ground conditions from rock and gravel through to silts and clays will determine the equipments and approach used in the ground investigations as will made up, contaminated ground and under water ground. Geotechnical specialists are used in the investigation and interpretation of results.Section 3 Field investigation Pages 24–45This section is more specific with regard to how the ground is investigated using methods such as excavating or drilling. Frequency of sampling and testing can be decided with the following in mind, the determination of the character and structure of all the strata and ground water conditions, the determination of the properties of the strata and the use of special techniques should ‘normal’ techniques not give satisfactory results. Shallow trial pits go to a maximum depth of 4–5 metres, comprehensive records should include the location and orientation of the pit and the face logged. Samples should be taken as soon as the pit is opened and closed as soon as possible properly – there are however advantages to leaving them open for a time. Samples are taken from deep trial pits and shafts at certain sites if necessary and if below the water table can become a more complicated process. Boring augers are in common use. There are two types of rotary drilling, open hole drilling and core drilling. The selection of the type and method used can depend on ground conditions and time and cost constraints. Recovered cores should be maintained as near as possible to its natural state until it is stored. In most cases it is inevitably disturbed. Another method is wash boring which is most applicable to sands, silts, and clays. However, these are not representative of the character and consistency of the penetrated strata. Ground water conditions are determined from water level in boreholes and the use of standpipe, hydraulic, electrical and pneumatic piezometers. Water samples should be representative and stored in appropriate containers. Backfilling should be well compacted to obviate the flow of groundwater to any aquifer below and/or settlement. The use of cement based grout can be used - bentonite is also used to decrease shrinkage. Sampling quality can be classified to determine depending on their disturbance and other factors such as, wet or dry ground. Samplers should conform to the standard. Sampling takes different forms i.e. – continuous sampling, the sand and window sampler and block sampling. Due to the cost of sample acquisition, samples should be treated with great care. Good methods of handling and labelling should be established.Section 4 Field Tests Pages 46–98These are used when laboratory testing is not enough to determine the required properties of the ground. Laboratory samples are at times not considered to be representative and of insufficient quality, stress, pore pressure, and degree of saturation. Discontinuities in the ground can also warrant filed tests. Sample sizes depend on ground nature and test type. Boreholes are commonly used. The SPT is a simple and inexpensive test which can furnish a piling contractor with useful information. The van test is used to determine the shear strength of a soil - material with coarse silt or sand can mean unreliable results. Permeability is found by determining whether the relevant aquifer is confined on unconfined with cognizance of the normal fluctuations in the aquifer. Installation of the borehole itself may influence stresses. For a reliable test this should be followed by a pumping test. Packer tests are also used to measure the impermeability of grouted ground and permeability of dam foundations, strength and deformation data can also be taken. There are many types, mechanical, hydraulic and pneumatic, the latter being the most popular. A clean borehole with a properly seated packer is essential (cement mortar is sometime used). Geophysical logs from the boreholes used can be taken at the same time enhancing the value of the results. Pressuremeter tests are used to stress, stiffness and strength of the ground to be investigated. It can be used in most ground types. There are three main types – pre-bored, self bored and pushed in. Boring should do minimal damage to the ground as much as possible. an unload reload method of around three times is used to give an accurate value of stiffness. Probing from the surface is done using a steel rod. Mainly used at a preliminary stage, it is also useful to check surrounding ground but is unsuitable in soils with boulders and cobbles. Static probing is mostly conducted with the use of electric sensors. It is quick and cheap. Pumping allows the determination of groundwater conditions using pumping and observation wells. Data interpretation can be complicated and is classed in steady and non-steady states. Density testing is conducted using the average of three results to obtain a significant result. The use of the sand replacement and core cutter test are common and the use of water replacement, rubber balloon, and nuclear methods are also used. In-situ testing data is important to design of works. Stress measurement in rocks and soils can be determined. Bearing tests are used to determine the shear strength and deformation characteristics of a soil. In-situ shear testing is done using a system similar to the laboratory shear box test. Large scale testing should be assessed on a case by case basis. Slope failure or settlement of a structure after field tests have been conducted are examples of phenomena which may be considered as back analysis, this be conducted successfully when accompanied by a full investigation to determine the ground and ground water conditions. Geophysical surveying can be useful in site investigation for determining layers of rock other geological features, locating aquifers, mineral deposits, voids – natural or man-made and engineering properties of the ground. Electrical resistivity and seismic methods amongst others are used. This is a specialized field. The geophysical adviser should be involved at all stages. Experience has shown care should be taken when writing the specification for this type of work amongst other factors.Section 5: Laboratory tests on samples Pages 101-111These tests are to be undertaken to describe and classify samples, investigate the fundamental behaviour of soils and rocks, obtain soil and rock parameters with reference to design requirements. Nature of ground and soil type, quality and how representative the sample is, method of analysis proposed, requirement of the design along with laboratory capabilities are all key factors in lab testing. Provision of good handling, labelling and storage should facilitate the nominated testing. Practical experience and skill in testing are invaluable and lead to reliable predictions being made. Sample quality should be borne in mind when testing, and finally reporting unambiguous results is desirable.Section 6: Description of soils and rocks Pages 112-140Results of ground investigations may be needed even after samples have been disposed, leaving only descriptions of the soil to go on, for this reason good descriptions should be given. Designers also use past experience of materials of similar properties. Quality of samples should be reflected in the description. Soil characteristics are based on particle size grading of the coarser particles and plasticity of the finer particles. Main descriptions should be kept concise however they can be followed by further details if applicable such as, density, discontinuities, bedding, colour, composite soil types, principal soil type, stratum name, geological formation, age and type of deposit and classification.Section 7: Field reports Pages 141-157Field reports are filled in by the drillers, engineers, technicians, the field report should encourage the operator to record all the data necessary for the eventual interpretation necessary for the design or action necessary for new or remedial works. after a time, samples are destroyed and the only record maybe the field report, for this reason it should be composed and written in properly. Description of ground, ground water, boreholes and other factors should be recorded and commented on, recommendation with regard to safety and design maybe made also.

BSW Weert

BSSID

BSSST...Tisincina

CTFKOMUXSHQLLL-UHFFFAOYSA-N

BSWM

BSPN360

BSRDC

BS 1852

BS 7988

BSSST...Tišinčina!

Ball-and-stick model of the BSTFA molecule

BS 5839 Part 1 Fire detection and fire alarm systems for buildings – Part 1: Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises is a standard published by the British Standards Institution. BS 5839-1:2013 supersedes BS 5839-1:2002+A2:2008, which has been withdrawn.

British Standard 8878 (BS 8878) is a Web Accessibility Code of Practice which was published by the BSI Group (also known as the British Standards Institution or BSI). The standard was officially launched on 7 December 2010.BS 8878 defines a process for creating and embedding a web accessibility strategy within an organisation.

BSR Valladolid

BS 857:1967 is a currently in-use British Standard specification for flat or curved safety glasses (toughened or laminated) for use in land vehicles, including road vehicles and railway vehicles. The standard specifies the mechanical, safety, impact and optical requirements as well as sampling and test methods.

BS 5400 is a British Standard code of practice for the design and construction of steel, concrete and composite bridges. It is applicable to highway, railway and pedestrian bridges.The standard specifies the requirements and the code of practice on design of steel, concrete (reinforced, prestressed or composite) and composite bridges that use steel sections (rolled or fabricated, cased or uncased) as well as the materials and workmanship in bridge erection.The standard also includes the specification and calculation of standard bridge loads, the application of the limit state principles, analysis, and fatigue load calculation and the reservoir method for fatigue load cycle counting.The standard also covers the structural design of bridge foundations and design and requirements on bridge bearings for ordinary and moving bridges.In 2010, BS 5400 was superseded by the Structural Eurocodes for the design of new bridges. However, BS 5400 still forms the basis of assessment standards for existing highway and railway structures. Some of the prescriptive clauses from the old code have been re-cast in a form consistent with the principles of the Eurocodes and presented as advisory material within British Standard Published Documents; these exist as non-contradictory complementary information (NCCI) to the Eurocodes and offer means of compliance with the requirements of the Eurocodes, typically using closed-form solutions familiar to the engineer experienced in the application of BS5400.

.bson

BS BolticGoeta

BSU-ARASOF Nasugbu Campus

International

BSS Group plc

BS Bokujou Monogatari

BSRKV

BSRDCL

BSV 92 Berlin

BSSE

BSTBS

Single seat glider

BSNL Broadband is an Internet access service from state-owned Bharat Sanchar Nigam Limited (BSNL) available in India since 14 January 2005. Until 30 September 2007 it was known as Data One.BSNL is commissioning a multi-gigabit, multi-protocol, IP infrastructure through National Internet Backbone-II (NIB-II), that will provide services through the same backbone and broadband access network. The broadband service will be available on digital subscriber line technology (on the same wire that is used for plain old telephone service), spanning 198 cities.NIB-II would have put India at par with more advanced nations. The services that would be supported include always-on broadband access to the Internet for residential and business customers, content-based services, video multicasting, video-on-demand and interactive gaming, audio and video conferencing, IP telephony, distance learning, messaging, multi-site MPLS VPNs with Quality of Service (QoS) guarantees. The subscribers would have been able to access the above services through Subscriber Service Selection System (SSSS) portal.The service will be given through Multi Protocol Label Switching (MPLS) based IP infrastructure. Layer 1 of the network will consist of a high-speed backbone composed of 24 core routers connected with high-speed 2.0 Gbit/s(STM-16) links.

BSV Villach Juniors

BSPR

*wing loading:

BSWW Beach Soccer Rankings

BSRA (disambiguation)

Christian Dalmau
BSN season 2010

₹99,390 million

BS 1363 plug adapters

BSRPS

The BSSN formalism is a formalism of general relativity that was developed by Thomas W. Baumgarte, Stuart L. Shapiro, Masaru Shibata and Takashi Nakamura between 1987 and 1999. It is a modification of the ADM formalism developed during the 1950s.The ADM formalism is a Hamiltonian formalism that does not permit stable and long-term numerical simulations. In the BSSN formalism, the ADM equations are modified by introducing auxiliary variables. The formalism has been tested for a long-term evolution of linear gravitational waves and used for a variety of purposes such as simulating the non-linear evolution of gravitational waves or the evolution and collision of black holes.

BS 7925-1 is BSI's standard glossary of software testing terms. This standard complements its partner BS 7925-2 (software component testing).BS 7925-1 was developed by the Testing Standards Working Party, sponsored by BCS SIGiST, and published in August 1998.

BSOI

BSR

BSNUPF (Everclear™)

Hafizan Hasnal

BSO (Azad)

BS 8494 is a 2007 British Standard for portable apparatus designed to detect and measure carbon dioxide in ambient air or extraction systems.

BSS 601HP

An old lamp with new flame

BS 5454

BSTAR is a way of modeling aerodynamic drag on a satellite in the SGP4 satellite orbit propagation model.Traditionally, aerodynamic resistance ("drag") is given by F D = 1 2 ρ C d A v 2 {\displaystyle F_{D}={\frac {1}{2}}\rho C_{d}Av^{2}} where ρ {\displaystyle \rho } is the air density, C d {\displaystyle C_{d}} is the drag coefficient, A {\displaystyle A} is the frontal area, and v {\displaystyle v} is the velocity.The acceleration due to drag is then a D = F D m = ρ C d A v 2 2 m {\displaystyle a_{D}={\frac {F_{D}}{m}}={\frac {\rho C_{d}Av^{2}}{2m}}} In aerodynamic theory, the factor B = C d A m {\displaystyle B={\frac {C_{d}A}{m}}} is called the ballistic coefficient, and its unit is area per mass. Further incorporating a reference air density and the factor of two in the denominator, we get the starred ballistic coefficient: B ∗ = ρ 0 B 2 = ρ 0 C d A 2 m {\displaystyle B^{*}={\frac {\rho _{0}B}{2}}={\frac {\rho _{0}C_{d}A}{2m}}} thus reducing the expression for the acceleration due to drag to a D = ρ ρ 0 B ∗ v 2 {\displaystyle a_{D}={\frac {\rho }{\rho _{0}}}B^{*}v^{2}} As it can be seen, B ∗ {\displaystyle B^{*}} has a unit of inverse length. For orbit propagation purposes, there is a field for BSTAR drag in Two-line element set (TLE) files, where it is to be given in units of inverse Earth radii. The corresponding reference air density is given as 2.461e-5 kg/m^2/Earth radii.

Saiful Arisal Ishak

purple

BSPI

BS Bassi

BSPA

Richard Johansson
Ola Fredricsson
Stefan Persson

BSRC FT

yes

BSON

Head Coach

Group B

BS4994 (formally: British Standard 4994:1987) is the "specification for the design and construction of vessels and storage tanks in reinforced plastics". It specifies a code of practice for use by manufacturers of such containers. With the publication of BS EN 13121-3, BS 4994:1987 Specification for design and construction of vessels and tanks in reinforced plastics is declared obsolescent, which will still cover those tanks still in service as tanks made from GRP are generally accepted to have a long working life.Dual laminate construction, simple FRP with glass mats, or a combination of unidirectional filament winding are common.DUAL LAMINATE : A thermoplastic lining material, preferably 3mm to 5mm thick sheet functions as a corrosion barrier. This thermoplastic liner is not considered to contribute mechanical strength. FRP which is constructed over this lining provides the strength requirements for materials to withstand design conditions like pressure, vacuum, hydrostatic load, etc. The choice of thermoplastic is based on the chemical corrosion requirement of the equipment. PP, PVC, PTFE, ECTFE, CPVC, PVDF are used as common thermoplastic liners.FRP (GRP): Glass mats in the form of chopped strand mat and woven roving is most common in hand lay-up method. These mats are laid on the mold and impregnated with 'initiated' resins like polyester, epoxy, vinyl ester, bisphenol epoxy vinyl ester, etc. The choice of resin is based on the chemical corrosion requirement of the equipment.An earlier version of the specification was BS 4994:1973.NEW LOAD UNITS: It is to avoid the uncertainty associated with specifying the thickness alone, that BS4994 introduced the concept of "unit properties". It is property per unit width, per unit mass of reinforcement. For example, UNIT STRENGTH is defined as load in Newtons per millimeter (of laminate width) for a layer consisting of 1 kg of glass per square meter, i.e., the unit is N/mm per kg/m2 glass.This standard still remains as most popular reference material for FRP tanks and vessels

BSRB

Herman Hasnal

BSS Gurukulam Higher Secondary School

BSU (disambiguation)

BS 7799

Album

The BSSN formalism is a formalism of general relativity that was developed by Thomas W. Baumgarte, Stuart L. Shapiro, Masaru Shibata and Takashi Nakamura between 1987 and 1999. It is a modification of the ADM formalism developed during the 1950s.The ADM formalism is a Hamiltonian formalism that does not permit stable and long-term numerical simulations. In the BSSN formalism, the ADM equations are modified by introducing auxiliary variables.

Leicester, England, UK

BSRF

BSV Schwarz-Weiss Rehden

BS 8

BSS Application Part (BSSAP) is a protocol in Signaling System 7 used by the Mobile Switching Center (MSC) and the Base station subsystem (BSS) to communicate with each other using signalling messages supported by the MTP and connection-oriented services of the SCCP.

BSPNews

₹630,000 million

BSSR Academy of Sciences

Svi zajedno

_whitesides

CC1=CO

BSTc

BS Automotive

Finals

_thindkbluesides

Syazwi Mohamed

BSS-601

BS 4994

BSS Application Part (BSSAP) is a protocol in Signaling System 7 used by the Mobile Switching Center (MSC) and the Base station subsystem (BSS) to communicate with each other using signalling messages supported by the MTP and connection-oriented services of the SCCP. For each active mobile equipment one signalling connection is used by BSSAP having at least one active transactions for the transfer of messagesBSSAP provides two kinds of functions:The BSS Mobile Application Part (BSSMAP) supports procedures to facilitate communication between the MSC and the BSS pertaining to resource management and handover control.The Direct Transfer Application Part (DTAP) is used for transfer of those messages which need to travel directly to a Mobile equipment from MSC bypassing any interpretation by BSS. These messages are generally pertaining to Mobility management (MM) or Call Management (CM).

BS 7

BSS Group

BSS Industrial Logo.png

BSSD

BSW (disambiguation)

BSU - Bukidnon State University

BS (ASCII)

BS 5930

BS4994 (formally: British Standard 4994:1987) is the "specification for the design and construction of vessels and storage tanks in reinforced plastics". It specifies a code of practice for use by manufacturers of such containers.

BSPN Radio

BSRTC

BSR (disambiguation)

BSO (disambiguation)

BS 2

Purple and white

BS 1852 colour code

Aizudin Abdul Rahman

BSR Tower

BSS plus

Data interchange

The Bangladesh Steel Re-Rolling Mills, commonly known as BSRM, is a Bangladeshi steel manufacturing conglomerate based in Chittagong. It was founded in 1952, when the Ismaili Africawala brothers established the first steel rolling plant in erstwhile East Bengal.

Fakhrullah Azanie

BSRIA

changed

BSTI

BSU-ARASOF

BS 5839 Part 1

BSS band

BSR Congress

BSTDB

BSX

N,O-Bis(trimethylsilyl)trifluoroacetamide (BSTFA) is a chemical compound that is used to derivatise labile groups such as hydroxyl on other chemicals, with the more stable trimethylsilyl group, which protects the labile group and allows the compound to be used for analytical purposes or as a chemical reagent for synthesis of more complex molecules.

BSTV

BS 4573

BS 5400 is a British Standard code of practice for the design and construction of steel, concrete and composite bridges.

BSV 22 Braunschweig

BSTS

BSWU

BST

BS 4

BSPHCL

BSP-tree

BS 5400

BS 6

The Beach Soccer Worldwide Beach Soccer Rankings are rankings for international beach soccer teams put together by BSWW and FIFA after FIFA Beach Soccer World Cups have taken place.

BSPM

BSOP

BSW

none

Telecommunications

BST1 (gene)

BSPN2 HD

BSWorks

BS 6879

BSS-601HP

BSSL

Red, Blue, Green, Yellow

BSP Rao

BSV 1892 Berlin

BSSM

BSRIA (it takes its name from the initial letters of the Building Services Research and Information Association) is a UK-based testing, instrumentation, research and consultancy organisation, providing specialist services in construction and building services engineering. It is a not-for-profit, member-based association, with over 650 member companies; related services are delivered by a trading company, BSRIA Limited. Any profits made are invested in its research programme, producing best practice guidance.BSRIA is a full member of the Construction Industry Council

BSP Series

BSPN2HD

BSRA

Fadzillah Isnon Ismail

BS 7925-2 is BSI's software component testing standard.The standard was developed by the Testing Standards Working Party, sponsored by BCS SIGiST, and published in August 1998.

BSWW World Rankings

Göttingen 535

BSU

BSWW

BST (disambiguation)

BS 1088

BSP - Left Bulgaria

Otto Hohmuth

BSND (gene)

Vijayan V. Anand

BSTJ

BSS Gurukulam Higher Secondary School[ISO Certified]

BS 4343

BS 5950

BS Boltic/Göta

BS 5454, "Recommendations for the storage and exhibition of archival documents" was a British Standard for the construction of building repositories for archive collections. It specified security standards, fire resistance and structural qualities for document storage buildings and their locations, environmental parameters (temperature and humidity ranges) designed to protect documents, shelving schemes, and materials for document containers.

BS 7799 was a standard originally published by BSI Group (BSI) in 1995. It was written by the United Kingdom Government's Department of Trade and Industry (DTI), and consisted of several parts.The first part, containing the best practices for Information Security Management, was revised in 1998; after a lengthy discussion in the worldwide standards bodies, was eventually adopted by ISO as ISO/IEC 17799, "Information Technology - Code of practice for information security management." in 2000.

BSNL Penta Smart PS501

BS Christiansen

BSOD - Blue Screen Of Death

BS Chimni

BS 5500

Tingvalla Isstadion

Pabellón Pilar Fernández Valderrama

Khairul Asnizam Ahmad

BS 5993

N,O-Bis(trimethylsilyl)trifluoroacetamide

BSP (file format)

BSRM

Draft

BS 4940

BS Arkanoid - Doh It Again

BSP (disambiguation)

Stadion der Waggonbauer
Ballspielverein Halle-Ammendorf 1910 e.V.

BSN Season 2009

BSTC

BSOT

BSR Innoship

BSP trees

Tower 1-24

BS All Japan Super Bombliss Cup '95

BSTAR is a way of modeling aerodynamic drag on a satellite in the SGP4 satellite orbit propagation model.Traditionally, aerodynamic resistance ("drag") is given by F D = 1 2 ρ C d A v 2 {\displaystyle F_{D}={\frac {1}{2}}\rho C_{d}Av^{2}} where ρ {\displaystyle \rho } is the air density, C d {\displaystyle C_{d}} is the drag coefficient, A {\displaystyle A} is the frontal area, and v {\displaystyle v} is the velocity.The acceleration due to drag is then a D = F D m = ρ C d A v 2 2 m {\displaystyle a_{D}={\frac {F_{D}}{m}}={\frac {\rho C_{d}Av^{2}}{2m}}} In aerodynamic theory, the factor B = C d A m {\displaystyle B={\frac {C_{d}A}{m}}} is called the ballistic coefficient, and its unit is area per mass.

BS 1

BSQ

met

BSWW Mundialito

BSPN The Magazine

Tower 2-27

BSP tree

Historische Deutsche Flugzeug bis 1945

N,O-Bis(trimethylsilyl)trifluoroacetamide (BSTFA) is a chemical compound that is used to derivatise labile groups such as hydroxyl on other chemicals, with the more stable trimethylsilyl group, which protects the labile group and allows the compound to be used for analytical purposes or as a chemical reagent for synthesis of more complex molecules. Siloxanes are usually more volatile than the corresponding hydroxyl compounds, and thus can be analyzed with gas chromatography better than the parent compound.
N,O-Bistrifluoroacetamide

BSV 98 Bayreuth